Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides safe connnection for light duty applications such as mini
    cars and Park Flyers.

INCLUDES:
2 plugs with diminish wrap

REQUIRES:
Soldering leads onto the connectors

SPECIFICATIONS:
Length: 16.6mm consisting of terminals
Width: 5.84mm
Height: 5.84mm

This product is often acquired with the above pointed out product.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic connector body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male connector (pins on both sides)
One male-female connector (pins on one side)
2 pieces of little Red heat-shrinkable tubing
2 pieces of little Black heat-shrinkable tubing

REQUIRES:
Solder, soldering iron (HCAR0775) or soldering weapon

SPECIFICATIONS:
Total length linked: .940" (24mm)
Length of plastic body, linked: .574" (14.6mm)
Pin length, six restaurants: .181" (4.6mm)
Width between pins: .058" (1.4mm)

COMMENTS:
The connector is NOT suitable with little White
    Futaba transmitter battery connectors.

The below product likewise sets truly well with the product being gone over.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is also called a JST connector.

FEATURES:
Designed for usage with the majority of Park Leaflet ElectriFly electronics
Red 2-pin flat connector is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality period

CONSISTS OF:
2 Male 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to connect wires to application

SPECIFICATIONS:
Plug Size-
    Length: 13mm (general with flanges)
    Width: 5.5mm
    Height: 3mm

COMMENTS:
For the female connectors with wire, usage GPMM3107
This connector can be utilized to change BEC-type connectors.

This product compliments the main item right here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FEATURES:
Deans Connectors provide less resistance
Lightweight
Permits current to move very fast
Permits more power

CONSISTS OF:
2 2B Micro Plugs with 4 sections of diminish wrap

REQUIRES:
Soldering wires to plugs, can use HCAR0775-soldering iron

Regularly acquired with the product that you are currently reviewing.



This is the Terrific Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Load with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing permits all cells to completely Charge to 4.2V ensuring
    optimum power from the pack, plus conditions the cells nicer
    so they will last longer
Safer as long as the Cell Balancer or a properly equipped Battery charger
    with Stabilizing Abilities is utilized

CONSISTS OF:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Load with Guideline Sheet

REQUIRES:
TWO 7.4V AC/DC Micro LiPo Balancing Battery charger with AC and DC Adapters
    (GPMM3321), or with Balancing Battery charger with Vehicle Adapter just
    (GPMM3322)

SPECIFICATIONS:
Capacity: 250mAh
Number of Cells in Series: 2
Ranked Voltage: 7.4V
Discharge Current: 20C (5A optimum)
Optimum Recommended Charging Amps: 0.3A
Pack Dimensions: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

COMMENTS:
READ the ENTIRE instruction sheet included with battery before usage
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER enable to Release listed below 2.5V per cell
NEVER dismantle or modify pack wiring in any method or leak cells
NEVER put on flammable materials or leave ignored throughout
    Charging
ALWAYS charge in a fireproof area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY stay out of reach of children