Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides secure connnection for light duty applications such as mini
    cars and Park Flyers.

INCLUDES:
Two plugs with shrink wrap

NEEDS:
Soldering leads onto the adapters

SPECIFICATIONS:
Length: 16.6mm consisting of terminals
Width: 5.84mm
Height: 5.84mm

This thing is frequently purchased with the above discussed thing.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic adapter body, Red in color
Non-polarized
Gold-plated pins

INCLUDES:
One male-male adapter (pins on both sides)
One male-female adapter (pins on one side)
Two pieces of small Red heat-shrinkable tubing
Two pieces of small Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering gun

SPECIFICATIONS:
Total length linked: .940" (24mm)
Length of plastic body, linked: .574" (14.6mm)
Pin length, six places: .181" (4.6mm)
Width between pins: .058" (1.4mm)

REMARKS:
The adapter is NOT compatible with small White
    Futaba transmitter battery adapters.

The below thing also sets really well with the thing being gone over.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is also referred to as a JST connector.

FEATURES:
Developed for use with a lot of Park Leaflet ElectriFly electronics
Red 2-pin flat adapter is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality warranty

INCLUDES:
Two Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to link wires to application

SPECIFICATIONS:
Plug Size-
    Length: 13mm (total with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female adapters with wire, use GPMM3107
This adapter can be used to replace BEC-type adapters.

This thing compliments the main item here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FEATURES:
Deans Connectors offer less resistance
Light-weight
Permits present to move extremely quickly
Allows for more power

INCLUDES:
Two 2B Micro Plugs with 4 areas of shrink wrap

NEEDS:
Soldering wires to plugs, can use HCAR0775-soldering iron

Frequently purchased with the thing that you are presently reading about.



This is the Fantastic Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Pack with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing allows all cells to fully Charge to 4.2V ensuring
    maximum power from the pack, plus conditions the cells better
    so they will last longer
Safer as long as the Cell Balancer or a properly equipped Charger
    with Balancing Abilities is used

INCLUDES:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Pack with Guideline Sheet

NEEDS:
2S 7.4V AC/DC Micro LiPo Balancing Charger with Air Conditioner and DC Adapters
    (GPMM3321), or with Balancing Charger with Car Adapter just
    (GPMM3322)

SPECIFICATIONS:
Capacity: 250mAh
Number of Cells in Series: 2
Ranked Voltage: 7.4V
Discharge Current: 20C (5A maximum)
Maximum Recommended Charging Amps: 0.3A
Pack Measurements: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

REMARKS:
CHECK OUT the ENTIRE guideline sheet included with battery before use
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER dismantle or modify pack circuitry in any way or puncture cells
NEVER put on flammable materials or leave unattended during
    Charging
ALWAYS charge in a fire-resistant area
ALWAYS set charger's output volts to match battery volts
CONSTANTLY shut out of reach of children