Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides protected connnection for light duty applications such as mini
    cars and Park Flyers.

INCLUDES:
Two plugs with diminish wrap

NEEDS:
Soldering leads onto the connectors

SPECS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

This thing is regularly purchased with the above mentioned thing.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic port body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male port (pins on both sides)
One male-female port (pins on one side)
Two pieces of little Red heat-shrinkable tubing
Two pieces of little Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering gun

SPECS:
General length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, six restaurants: .181" (4.6mm)
Width between pins: .058" (1.4mm)

REMARKS:
The port is NOT suitable with little White
    Futaba transmitter battery connectors.

The below thing likewise pairs actually well with the thing being reviewed.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is also called a JST connector.

FEATURES:
Developed for usage with many Park Flyer ElectriFly electronics
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality period

CONSISTS OF:
Two Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to connect wires to application

SPECS:
Plug Size-
    Length: 13mm (overall with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female connectors with wire, usage GPMM3107
This port can be utilized to replace BEC-type connectors.

This thing compliments the main item right here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FUNCTIONS:
Deans Connectors provide less resistance
Lightweight
Enables existing to move really quick
Allows for more power

CONSISTS OF:
Two 2B Micro Plugs with four sections of diminish wrap

NEEDS:
Soldering wires to plugs, can utilize HCAR0775-soldering iron

Often purchased with the thing that you are currently checking out.



This is the Terrific Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Load with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing permits all cells to totally Charge to 4.2V guaranteeing
    maximum power from the pack, plus conditions the cells better
    so they will last longer
Safer as long as the Cell Balancer or a properly equipped Battery charger
    with Stabilizing Capabilities is utilized

CONSISTS OF:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Load with Instruction Sheet

NEEDS:
2S 7.4V AC/DC Micro LiPo Balancing Battery charger with Air Conditioning and DC Adapters
    (GPMM3321), or with Balancing Battery charger with Car Adapter just
    (GPMM3322)

SPECS:
Capacity: 250mAh
Variety of Cells in Series: 2
Ranked Voltage: 7.4V
Discharge Current: 20C (5A maximum)
Maximum Recommended Charging Amps: 0.3A
Pack Measurements: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

REMARKS:
READ the ENTIRE guideline sheet consisted of with battery prior to usage
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER permit to Release listed below 2.5V per cell
NEVER take apart or modify pack circuitry in any method or leak cells
NEVER place on flammable materials or leave unattended during
    Charging
ALWAYS charge in a fireproof location
ALWAYS set battery charger's output volts to match battery volts
ALWAYS keep out of reach of children