Deans Micro 2R Red Polarized Connector

This is the Micro 2R Plug from W S Deans.

FEATURES:
For battery to speed control connections.
Provides safe and secure connnection for light responsibility applications such as mini
    vehicles and Park Flyers.

INCLUDES:
Two plugs with diminish wrap

NEEDS:
Soldering leads onto the connectors

SPECIFICATIONS:
Length: 16.6mm including terminals
Width: 5.84mm
Height: 5.84mm

This thing is frequently purchased with the above mentioned thing.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic adapter body, Red in color
Non-polarized
Gold-plated pins

INCLUDES:
One male-male adapter (pins on both sides)
One male-female adapter (pins on one side)
Two pieces of little Red heat-shrinkable tubing
Two pieces of little Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering weapon

SPECIFICATIONS:
Overall length linked: .940" (24mm)
Length of plastic body, linked: .574" (14.6mm)
Pin length, six locations: .181" (4.6mm)
Width in between pins: .058" (1.4mm)

REMARKS:
The adapter is NOT suitable with little White
    Futaba transmitter battery connectors.

The listed below thing also sets really well with the thing being gone over.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise referred to as a JST connector.

FEATURES:
Developed for use with most Park Flyer ElectriFly electronic devices
Red 2-pin flat adapter is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality assurance

INCLUDES:
Two Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to connect wires to application

SPECIFICATIONS:
Plug Size-
    Length: 13mm (total with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female connectors with wire, use GPMM3107
This adapter can be used to replace BEC-type connectors.

This thing compliments the main item here.

Micro 2B Black Polarized Connector

This is Micro 2B Plug by Deans
For Motor to Speed Control Fem Pin + on motor/male pin + on speed control

FEATURES:
Deans Connectors offer less resistance
Lightweight
Permits present to move really quickly
Permits more power

INCLUDES:
Two 2B Micro Plugs with four areas of diminish wrap

NEEDS:
Soldering wires to plugs, can use HCAR0775-soldering iron

Frequently purchased with the thing that you are currently reviewing.



This is the Great Planes ElectriFly
Lithium Polymer 250mAh 7.4V 20C Battery Load with Balance Connector.
Included with the Great Planes Micro F-86 Sabre RTF and RXR.

FEATURES:
Balancing allows all cells to completely Credit 4.2V ensuring
    optimum power from the pack, plus conditions the cells better
    so they will last longer
Safer as long as the Cell Balancer or an effectively geared up Battery charger
    with Stabilizing Abilities is used

INCLUDES:
Great Planes ElectriFly Lithium Polymer 250mAh 7.4V 20C
    Balance Battery Load with Guideline Sheet

NEEDS:
TWO 7.4V AC/DC Micro LiPo Balancing Battery charger with A/C and DC Adapters
    (GPMM3321), or with Balancing Battery charger with Automobile Adapter just
    (GPMM3322)

SPECIFICATIONS:
Capability: 250mAh
Variety of Cells in Series: 2
Ranked Voltage: 7.4V
Discharge Current: 20C (5A optimum)
Optimum Recommended Charging Amps: 0.3A
Pack Measurements: 1.4 x 0.75 x 0.51" (37 x 19 x 13mm)
Weight: 0.53oz (15g)

REMARKS:
READ the ENTIRE guideline sheet included with battery prior to use
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER permit to Release listed below 2.5V per cell
NEVER dismantle or customize pack wiring in any method or leak cells
NEVER place on combustible products or leave ignored during
    Charging
ALWAYS charge in a fireproof area
ALWAYS set battery charger's output volts to match battery volts
ALWAYS stay out of reach of kids