Deans Male Pigtail

This is the Deans Male Ultra Plug with Pigtail.

FEATURES:
Removes the possibility of reverse polarity connections
Supplies safe connection for battery and motor connections

INCLUDES:
One Male Deans connectors with pigtail

SPECIFICATIONS:
Length: 5" (127mm)
12 gauge +/- wires

Below is another product that compliments the product being discussed.

Ultra Plug, Female (2Pk)

These are 2 W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Removes the possibility of reverse polarity connections
Low resistance, compact size
Supplies a secure connection for battery and motor connections on
    R/C automobiles

INCLUDES:
Two WS Deans 2-Pin Female Ultra Plug Connectors with section of
    shrink tubing

REQUIRES:
Soldering connectors onto wires
Soldering iron HCAR0776
Solder STAR2000

COMMENTS:
For Male end usage WSDM1302
For both Male and Female usage WSDM3001

This product compliments the main item right here.



This is a High Grade, 12 gauge Wire Useable In R/C Products To Bring High
Currents of Electricity.

FEATURES:
12 gauge Wire Has Less Voltage Drop, Due To Less Resistance.
Very Versatile
Wire Made Of Copper

INCLUDES:
One 2' red (+) wire
One 2' black (-) wire

This product compliments the above discussed product.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Equipment Type : All Nylon Equipment
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specs:
Measurement : 23mm x 12mm x 29mm
Adapter Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing content:
1 x 9g TITAN Servo Sets (with accessories)

This is a great enhancement to the product presently being discussed.

Gold Plated Bullet Conn Female 4mm (3)

Created for usage with 3 wire Brushless motor systems, this is
the 4mm Gold Bullet Adapter Female from Great Planes.

FEATURES:
Gold plated
Fits wire diameter up to 4mm

INCLUDES:
Three female bullet connectors

REQUIRES:
Solder and soldering iron - HCAR0776 and HCAR0776

SPECIFICATIONS:
Length: .87" (22mm)
Size: .16" (4mm) inside
Size: .19" (5mm) outside

COMMENTS:
For the 4mm male port order GPMM3114

Below is a wonderful product that lots of others have purchased the same time.

Heat Shrink Tubing Set, 3/16" (4.7Mm) 8/Pkg

This is a set of 3/16" Size Heat Shrink Tubing from Dubro.

FEATURES:
Created to shrink up to 1/2 of its initial size
Ideal for insulating electrical splices, covering electrical plugs
    and connectors

INCLUDES:
4 pieces of red heat shrink tubing
4 pieces of black heat shrink tubing

REQUIRES:
Diminish tubing on all sides with heat gun, butane lighter or soldering
    iron

SPECIFICATIONS:
Size: 3/16" (4.5mm)
Length: 1-1/2" (38mm)

COMMENTS:
Use a tubing size that disappears than twice the diameter of the
    object being covered.

Get this product to boost the one you read around.



Created for usage with 3 wire Brushless motor systems, this is
    the 4mm Gold Bullet Adapter Male from Great Planes.

FEATURES:
Gold plated

INCLUDES:
Three male bullet connectors

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECIFICATIONS:
Length: .83" (21mm)
Size: .16" (4mm) outside

COMMENTS:
For the 4mm female port order GPMM3115