Cybergun GATE MERF 3.2 Burst Advanced MOSFET Unit (Model: Retail)

Active Braking:(Improved mode) Stops the motor as quickly as the switch is launched, avoids spring compression or additional shots after the shot in semi-auto mode
Securities for Li-Poly/LiFePO4/Li-Po/Li-ion/Li-Fe/NiCd batteries; short-circuit defense; over temperature defense; eliminate electrical arcing(Improved mode only); Gets rid of power loss and electrical arc damage from mechanical switch
Configuration can be made with included shows button or AEG trigger switch depending upon operating mode
MOSFET integrated circuit for greater efficiency and faster trigger action(boosted mode); Rate Of Fire Control: Smart Trigger enables rate of fire control from 30%~100%. The very first shot in full-auto or burst is always 100% ROF for the fast trigger action
Suitable for most AEGs and change mechanical trigger switch; Suitable with most AEG motors and battery packs from 3.2V to 15V
3-Round Burst Firing Mode: Permits standard SAFE/SEMI/AUTO shooting modes to be converted into SAFE/SEMI/BURST (simple/boosted mode) or SAFE/BURST/AUTO(enhanced mode); trigger can be launched early in Burst mode to do shorter bursts
Electronic resettable fuse, self-reset after the trigger is launched for the ease of usage
CLICK HERE for Guideline Manuals

The Gate MERF 3.2 Mosfet Unit is the Third generation of airsoft Mosfets from Gate. This system permits increased trigger action time, loss-less rate of fire modification, adjustable 3-round burst mode, active motor breaking, and secures Batteries. This Mosfet has the ability to handle as much as 15 volts, has 10 various functions, and run in 2 modes: Improved mode and Simple mode.(1) Improved mode. will need you to do some transmission work and soldering but will allow you to make the most of the Features of this awesome Mosfet.(2) Simple mode. No adjustment to your AEG is required simply plug and play, but will not stop Trigger contact Arcing.This Mosfet works with most AEG's, including upgraded AEG's.

Compatibility: For most gearbox and AEG platform.
Dimensions: 70 x 20 x 10 mm
Maximum continuous current: 35A ( 50A for 3 min )
Stand-by present: 0.15mA
Resistance: 2.4 mOhm
Weight: 15g
Running modes: (a)Simple mode (b)Improved mode
Manufacture: GATE / Poland

MOSFET: It gets rid of any loss of energy which takes place while mechanical contacts touch each other. It also ensures they won't burn unavoidably - the average life of mechanical contacts is 1 year. Thanks to this electronic circuit the battery energy is not lost while burning contacts but directed directly to the motor. In this way we grow rate of fire which leads to quicker response of the trigger.

Active Breaking: The motor and gears at work gather in the kinetic energy. This energy depends mainly on their speed. The maximum speed is reached after 4 shots. For this factor when you launch the trigger the motor will not stop right away - the energy accumulated in it, depending upon the amount enables on few additional shoots.

1. In the sniper rifles, and during the shooting on SEMI, the brake will not allow to compression spring after the shot. The piston will always stop at the front position, so that will increase transmission life-span.
2. 2. To increase of realism. After releasing the trigger in real guns are not fired additional bullets, as takes place in AEG reproductions. We do not waste ammunition.

Electronic Fuse:
SCP Short Circuit Security When it comes to short-circuit setups, in milliseconds the system disconnects the battery. This is necessary for the defense of the Li-Poly. Shorting Li-Poly battery can cause long-term damage, damage and even explosion of cells!
OTP Over Temperature Security Integrated thermometer determines the temperature of the system. If it goes beyond a crucial worth, the system closes down to prevent its destruction.
UVP Under Voltage Security Safeguards rechargeable Li-Ion: Li-Poly / LiFePO4 and NiCd versus extreme discharge.
The fuse is reset right away after the trigger is launched. After another of his press, in milliseconds, carries out a series of measurements, which figure out whether the battery can be securely linked to the replica.

Smart Trigger: Enables faster trigger action. It cooperates with the ROF Control system. Throughout the very first shot Smart Trigger sets ROF Control to 100%. After the very first shot it is set of pre-programmed worth, eg 30%. As a result, the very first shot is fired with full rate of fire, and next shots with a decreased ROF. The best impact can be accomplished utilizing a battery with greater voltage than the requirement. Then we will get faster trigger action at the exact same rate of fire as in case of standard battery

About GATESince 2009, GATE company has been designing and producing the most ingenious AEG Control Systems and MOSFETs. GATE has premises located in Cracow, Poland with items effectively got in global markets and are being offered in more than 30 nations.