Common Sense RC Tamiya Female to Deans-Type Male Conversion Adapter

Don't wish to slice the existing adapter off of your ESC or battery? Wish to conserve yourself a lot of soldering time? This Tamiya Female to Deans-Type Male Conversion Adapter is the quick, easy and inexpensive solution for your mismatched adapter.

This product is often purchased with the above mentioned product.



This is the Racers Edge EZ80 Air Conditioner DC Multi-Chemistry Charger.

Features:

Designed to be user-friendly to run
Can charge NiCd, NiMH, LiPo, Life and even Pb Acid Gelcell (starter) batteries
Both Air Conditioner and DC power choices
One year product warranty versus maker defects (through the maker - Racers Edge)

Includes:
One Racers Edge EZ80 Air Conditioner DC Multi-Chemistry Battery charger

Requires:
Suitable battery

Specs
Input Voltage Air Conditioner: 120-240V
Input Voltage DC: 11-18V
Charge Current: 0.1-6.0A
Discharge Current: 0.1-2.0A
Charge Power: 80W Maximum
Discharge Power: 10W Maximum
Balance Present: 300mA
Balance Tolerance: +-0.01V
NiCd/NiMH Battery Cell Count: 1-18 Cells
Lithium Battery Types: LiPo, Li-Ion, LiFe
Lithium Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2-24V
Weight: Approx. 640g
Dimensions: Approx. 145x145x56mm

Lots of others have purchased this product together with the product that you are presently checking out.

Deans-Type Female to Tamiya Male Conversion Adapter

Don't wish to slice the existing adapter off of your ESC or battery? Wish to conserve yourself a lot of soldering time? This Deans-Type Female to Tamiya Male Conversion Adapter is the quick, easy and inexpensive solution for your mismatched adapter.

Get this product to boost the one you read about.



This is the Radio Controlled, Electric Powered, Ready to Run
Wraith Spawn Rock Racer from Axial.

FEATURES:
Chassis: Complete tube composite chassis
Drive: Four wheel with locked differentials and balance out pumpkin for
    more ground clearance and a better driveshaft angle, AR60 OCP-Axle
    built from high strength, low flex composite product, axle
    tubes are reinforced and intensified with a boxed-in axle truss to
    disperse stress over a bigger location
Radio: 2-channel pistol grip with steering and throttle
    trim and reverse
Steering Servo: Method TSX45 metal gear servo with 151 oz-in of
    torque, metal gear train and double ball bearings
ESC: AE-5, waterproof-can be switched in between LiPo and NiMH battery
    types with a simple jumper, THREE LiPo compatible, drag brake
Motor: 20 turn brushed
Slipper Clutch: Dual pad for included area, 32P spur gear
    for high-torque applications
Body: Retro styled SUV body with reasonable driver figure complete
    with race match and three interchangeable helmets, motocross,
    open skull face or motorsport version, body is also compatible
    with Wraith, AX10 and SCX10 chassis
Battery Tray: Sized for standard stick pack and LiPo packs up to
    1.8x5.9x1.1" (47x150x28mm) in size
Receiver Box: Waterproof, silicone seals for antenna, servo wires and
    receiver box lid
Suspension: True 4 link enhanced to lower axle guide, and to
    have the correct amount of anti-squat and roll qualities
Shocks: Composite body , oil filled
Wheels: Technique IFD (interchangeble face design) beadlock design,
    black in color, adjustable breather holes for fine tuning tire
    efficiency
Tires: Ripsaw 2.2

CONSISTS OF:
RTR Axial Wraith-Spawn with 2.4GHz Radio, Motor, ESC, Body,
    and Directions

NEEDS:
Battery: 7.2V NiMH 6-cell stick pack with standard adapter, or 7.4V
    TWO LiPo pack
Battery Battery charger: For selected battery type
AA Batteries: Four for transmitter

SPECS:
Vehicle;
Wheelbase: 13.98" (355mm)
Ground Clearance: 2.8" (71.6mm)
Height: 9.1" (232mm)
Width: 11.22" (285mm)
Length: 19.25" (489mm)
Weight: 5.45lbs (2.47kg)
    Body;
Length: 16.75" (425mm)
Width: 5.7" (146mm)
Height: 5.4" (137mm)

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Location Qty. Bearing Set
2 10x15x4mm Fr Diff 1 DTXC1595
2 10x15x4mm Rear Diff 1 DTXC1595
2 5x11x4mm Fr Axle Housing 1 DTXC1547
2 5x11x4mm Rear Axle Housing 1 DTXC1547
2 5x11x4mm Fr Dogbones 1 DTXC1547
2 5x11x4mm Rear Dogbones 1 DTXC1547
5 5x10x4mm Gearbox 2 DTXC1535
1 8x16x5mm Gearbox 1 DTXC1585
1 5x11x4mm Spur Gear 1 DTXC1547