Common Sense RC G.T. Power Digital Professional Servo Tester

ONE OF THE MOST ACCURATE WAY TO TEST YOUR SERVOS!
Servos are exactly what make the RC world go 'round. One bad servo can keep your airplane, car, or heli in the garage or lead to a pricey, disastrous crash. Thankfully, the G.T. Power Specialist Servo Tester allows you to check your servos with precision accuracy! This feature-rich tester digital tester carries out all functions electronically so you get the most constant screening results possible.
Functions

Completely electronic for the most accurate, constant screening
High-contract LCD screen and large rotary knob for simple, simple programs
Equipped with servo and receiver wires
Can be powered via the balance port of a 2S lipo battery or via the 7.4v~12v DC input with the included leads
4.8 volt output

Modes

LN Mode - This mode is used to check the linearity and resonance of a servo. This can also be used to check the linearity and resonance point of an ESC.
ED Mode - The mode is used to check the endurance of a servo.
FP Mode - This mode is used to check the servo's ability to neutral itself. If set up on the airplane, you can find out the logical mid-point of servo precisely.
DB Mode - The mode is used to check the dead band of a servo. It can also be used to compute the resolution of a servo. The test can also be used to choose the servo based on differential timing. This is terrific for models like CCPM which need 3 servos for its rotor head.
SP Mode - This mode is used to perform speed test for a servo, and it allows you to choose the most skilled servo based on all the criteria that are carried out in the test (i.e. response time and differential timing).
WP Mode - The mode is used to check the aging and life of the servo. Swings the servo left to right at a user-selected speed. There are some specific reparative functions for some aquiver servos.
PW Mode - This mode is used to check the output pulse of port and test whether there is any issue on the signal unstable of the quiver of servo.

Specifications

Dimensions: 96 x 70 x 17.5mm