Common Sense RC Parallel Charging Board for Blade mCP X and mCX/mSR/Proto X Lipo

Charge (6) mCX & (6) mCP X / Proto X batteries at the exact same time!


This brand-new CSRC paraboard supports both mCP X and mCX/mSR/Proto X connectors and allows you to charge up to twelve batteries at the exact same time! Because it charges in parallel, you can charge as couple of as one or as lots of as 6 batteries of differing capacities at once.
Also excellent for batteries used in the Parkzone Vapor/Night Vapor, P-51, Ember, T-28 Trojan, Sukhoi Su-26, Spitfire, Stryker, Pole Feline, Corsair, in addition to Blade Scout and Nano CPX.
Max Charge Current: 4.8A

HOW TO USAGE IT
The paraboard allows you to link up to twelve batteries in parallel so that you can charge them as a single larger mA single cell battery (i.e. 1s6p). The only requirement is that all the batteries be within .10 of a volt of each other before charging. For example, if you either time your flights or fly till cutoff. You wish to prevent linking a completely charged battery to a group of discharged cells, considering that a rapid rush of current would occur.

Calclulate your charge rate by adding together the mAh of all the batteries you intend to charge. To charge your batteries at a 1C rate, divide your combined mAh by 1,000 and this will inform you what your amperage setting must be. e.x. (6) 3.7V 300mAh batteries would be: (6 * 300) = 1800 / 1000 = 1.8A

Regularly acquired with the item that you are presently reading about.

150mAh 1S 3.7V 45C LiPo Battery

You will like this item if you have the item above pointed out.



This is the Racers Edge EZ80 AC DC Multi-Chemistry Charger.

Features:

Designed to be instinctive to operate
Can charge NiCd, NiMH, LiPo, Life as well as Pb Acid Gelcell (starter) batteries
Both AC and DC power choices
One year item warranty against maker problems (through the maker - Racers Edge)

Includes:
One Racers Edge EZ80 AC DC Multi-Chemistry Charger

Requires:
Suitable battery

Specs
Input Voltage AC: 120-240V
Input Voltage DC: 11-18V
Charge Current: 0.1-6.0A
Discharge Current: 0.1-2.0A
Charge Power: 80W Maximum
Discharge Power: 10W Maximum
Balance Current: 300mA
Balance Tolerance: +-0.01V
NiCd/NiMH Battery Cell Count: 1-18 Cells
Lithium Battery Types: LiPo, Li-Ion, LiFe
Lithium Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2-24V
Weight: Approx. 640g
Dimensions: Approx. 145x145x56mm

Want another fantastic item to compliment the above mentioned item?






Below is another item that compliments the item being discussed.



This is the ONE 3.7V 390mAH LiPo Battery for the Dromida Kodo Quadcopter.

FEATURES:
Replaces worn Kodo quadcopter batteries
Recharges with the Kodo USB battery charger, DIDE1511

SUCHES AS:
ONE 3.7V 390mAH LiPo Battery

This item is regularly acquired with the above mentioned item.



This is the Battery Plug Adapter for the
Helimax Axe 100 CP Flybarless Helicopter.

FEATURES:
Connects battery to TAGS control panel

SUCHES AS:
Battery Plug Adapter (crucial #30)