Common Sense RC Lectron Pro 7.4V 7600mAh 75C Lipo Battery with Deans

This 2-cell 7600mAh 75C lipo is ideal for 1/10 scale cars, trucks, and buggies! Consists of a Traxxas port on the discharge leads.
Requirements

Length: 138 mm
Width: 47 mm
Height: 25 mm
Weight: 329 g

Get this thing to enhance the one you read about.



This is the Racers Edge EZ80 AC DC Multi-Chemistry Charger.

Features:

Designed to be instinctive to operate
Can charge NiCd, NiMH, LiPo, Life and even Pb Acid Gelcell (starter) batteries
Both AC and DC power choices
One year item service warranty against producer problems (through the producer - Racers Edge)

Consists of:
One Racers Edge EZ80 AC DC Multi-Chemistry Charger

Needs:
Compatible battery

Requirements
Input Voltage AC: 120-240V
Input Voltage DC: 11-18V
Charge Current: 0.1-6.0A
Discharge Current: 0.1-2.0A
Charge Power: 80W Optimum
Discharge Power: 10W Optimum
Balance Present: 300mA
Balance Tolerance: +-0.01V
NiCd/NiMH Battery Cell Count: 1-18 Cells
Lithium Battery Types: LiPo, Li-Ion, LiFe
Lithium Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2-24V
Weight: Approx. 640g
Dimensions: Approx. 145x145x56mm

Below is a great thing that several others have actually bought at the same time.



This is the Hitec X2 AC Plus Dual Input Battery Charger.

FEATURES:
Charges 1-6 cell LiPo, LiHV, Li-Ion and LiFe batteries
1-15 cell NiCd, NiMH batteries, and 2-20V lead acid batteries
Dual inputs with 2 independent circuits
Powered by either 11-18V DC or 100-240V AC source of power
10A power supply
0.1-10A adjustable charge present for each port
Each port has independent balancer for lithium cells
Re-Peak mode for NiMH/NiCd Battery, peaks batteries 1-3 times in a
    row to guarantee a full charge
Ten programmable profile settings for each channel
Permits remote control by means of smartphone with optional WiFi module
    (not consisted of), order HRCP4228
Internal balancing circuits
Charge Master software application permits keeping an eye on pack voltage, cell voltage
    and other information by means of personal computer, as well as initiating and
    updating firmware
LiPo battery meter
Battery internal resistance meter
One year restricted service warranty from the date of purchase through HITEC
    RCD U.S.A, INC

CONSISTS OF:
X2 AC Plus Dual Input Battery Charger, AC Power Cord, Universal
    Balancing Board, Balance Adapter, 2 18AWG Charging Cables

NEEDS:
AC input or 11-18V DC input

SPECS:
Charge Current Variety: 0.1-10.0 amps
Optimum Charge Output: AC 100W / DC 100W x 2
AC Input: 100-240V AC
DC Input: 11-18V DC
Overall Charge Circuit Power: 100W AC, 200W DC Input
Discharge Current Variety: 10W x 2
Discharge Present Power: 0.1-5.0A x 2
Current Drain for LiPo Balancing: 200mA per cell
NiCd/NiMH Battery Cell Count: 1-15 cells
Capacity Variety: 100 - 50000mAh
LiPo/LiHV/LiFe/Lilon Cell Count: 1 - 6 cell
pB Battery Voltage: 2-20V
Weight: 2.15pounds (975g)
Dimensions: 6.42 x 6.02 x 2.83" (163 x 153 x 72mm)