Common Sense RC Lectron Pro 7.4V 450mAh 40C Lipo Battery with JST PH 2.0 connect

This 2-cell Lithium Polymer 450mAh battery pack is fantastic for tons of applications, and is a fantastic choice for tons of smaller sized drones and aircrafts! Functions a JST port on the discharge leads and standard JST-XH balance leads. 40C constant discharge rate of 18 amps.

Dimensions:

Length: 53mm (2.08 in.)
Width: 30mm (1.18 in.)
Height: 9mm (0.35 in.)
Weight: 30g (1.05 oz)

Frequently purchased with the item that you are currently reviewing.

IC3 Battery to JST PH2.0 Device

Requirements

Accessory Type: Connectors & Adapters

Want an additional wonderful item to match the above pointed out item?

SCX24 Motor w/ Pinion

Want an additional wonderful item to match the above pointed out item?

USB Charger LiPo

Below is a wonderful item that several others have purchased the very same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Secret Functions:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Practical narrow-stance rock spider body in olive green or red
• Molded roll cage with sensible light bar
• Practical motorist figure and numerous other scale details
• Formally certified KMC XD229 Machete Crawl wheels
• Formally certified Nitto Path Grappler M/T tires (S30 compound, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts enable optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones offer strength and toughness
• Rugged steel C-channel frame rails with bracing keep everything stiff and lined up
• Front and rear axles consist of a two-piece, molded plastic strong axle style
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated reservoir and durable plastic suspension links deliver tested Axial crawling efficiency
• Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive likewise provides a low gear ratio to decrease torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the best rig to take along on your hiking, outdoor camping, and other outside and indoor experiences — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even brand-new modelers driving the SCX24 chassis will be fully equipped to tackle tough climbs up and rough tracks. Like the larger SCX10™ chassis, this smaller sized version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pushing onward and upward.

For the most trusted handling, the SCX24 chassis includes a three-link front and four-link rear suspension. The mix of coil-over shocks and durable plastic suspension links provides Axial-worthy crawling efficiency even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that lowers torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt displays proficiency and charisma on the tracks. Take a look at that Deadbolt body — with its narrow position, bulging hood, sensible motorist figure, and molded roll cage with sensible light bar. The realism continues right down to the ground, where you’ll discover certified KMC XD229 Machete Crawl wheels wrapped in Nitto Path Grappler tires.

Adding a lot more to its newbie appeal, the SCX24 Deadbolt comes 100% total and ready to run. Whatever required for action is in the box: assembled and finished lorry; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electrical motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even 4 AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (set up)
    (1) Dynamite® 88T brushed electrical motor (set up)
    (1) Axial AS-1 guiding servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Handbook




STEEL C-CHANNEL CHASSIS FRAME RAILS
Similar to the 1/10th scale SCX10™ platform, the SCX24™ chassis functions rugged and strong steel c-channel frame rails with bracing to keep everything intact and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor provides the right amount of torque to assist rise steep climbs up. It's mated to a steel motor mount to keep flex to a minimum, which helps secure the gears.
 


WORM GEARS
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones offer strength and toughness to keep things running during tough climbs up and rough tracks.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to enable optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the mix of coilover shocks with simulated reservoirs and durable plastic suspension links provides the crawling efficiency you have actually known and anticipate from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, formed plastic strong axle style. For optimum handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 brilliant LED lights are consisted of and are installed in the front bumper. An additional LED light port on the ESC permits you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry uses a 4-Link style for the rear which is optimized to decrease axle guide and torque twist. We have actually likewise consisted of additional suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally certified KMC XD Machete wheels are famous in the off-road world. They are formed in black and feature spectacular scale details, in spite of the small scale.
The formally certified Nitto Path Grappler M/T Tires use a great blend of off-road efficiency while still keeping exceptional composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by getting rid of just two body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller sized in size doesn't imply the functions require to do the same. No bushings found here, rather the drivetrain is freely spinning on sealed cartridge bearings throughout the entire lorry.
 

AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that enables guiding precision, while likewise offering protection for the servo gears in the event of a bind or effect.
 

Requirements

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Battery charger: USB LiPo charger (consisted of)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No