Common Sense RC Lectron Pro 7.4V 450mAh 40C Lipo Battery with JST PH 2.0 connect

This 2-cell Lithium Polymer 450mAh battery pack is terrific for tons of applications, and is an excellent alternative for tons of smaller drones and planes! Features a JST port on the discharge leads and basic JST-XH balance leads. 40C constant discharge rate of 18 amps.

Dimensions:

Length: 53mm (2.08 in.)
Width: 30mm (1.18 in.)
Height: 9mm (0.35 in.)
Weight: 30g (1.05 oz)

Frequently acquired with the item that you are currently checking out.

IC3 Battery to JST PH2.0 Device

Specifications

Device Type: Connectors & Adapters

Want an additional fantastic item to compliment the above pointed out item?

SCX24 Motor w/ Pinion

Want an additional fantastic item to compliment the above pointed out item?

USB Charger LiPo

Below is a fantastic item that many others have purchased the same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Secret Features:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Practical narrow-stance rock spider body in olive green or red
• Molded roll cage with realistic light bar
• Practical chauffeur figure and many other scale information
• Officially licensed KMC XD229 Machete Crawl wheels
• Officially licensed Nitto Trail Grappler M/T tires (S30 substance, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones offer strength and durability
• Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
• Front and rear axles include a two-piece, molded plastic solid axle design
• 3-Link front and 4-link rear suspension supply ideal handling
• Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance
• Front and rear differentials each home a worm gear setup to power the axles and develop higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the best rig to take along on your hiking, outdoor camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even brand-new modelers driving the SCX24 chassis will be fully equipped to deal with tough climbs and rough routes. Like the larger SCX10™ chassis, this smaller variation uses plenty of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pressing onward and upward.

For the most trusted handling, the SCX24 chassis includes a three-link front and four-link rear suspension. The mix of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm gear drive setup allows a high ground clearance plus a low gear ratio that lowers torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt shows off skills and charisma on the routes. Have a look at that Deadbolt body — with its narrow stance, bulging hood, realistic chauffeur figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you’ll discover licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.

Adding a lot more to its novice appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything needed for action is in the box: put together and finished automobile; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electric motor and 350mAh two 7.4V LiPo battery; USB LiPo battery charger; and even four AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (installed)
    (1) Dynamite® 88T brushed electric motor (installed)
    (1) Axial AS-1 guiding servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Product Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and durable steel c-channel frame rails with bracing to keep everything intact and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the correct amount of torque to help ascend steep climbs. It's mated to a steel motor install to keep flex to a minimum, which helps secure the gears.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm gear setup to get the power to the axles and develop higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones offer strength and durability to keep things running throughout tough climbs and rough routes.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the mix of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you have actually understood and anticipate from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a two piece, molded plastic solid axle design. For ideal handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two intense LED lights are included and are installed in the front bumper. An additional LED light port on the ESC permits you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry makes use of a 4-Link design for the rear which is optimized to reduce axle guide and torque twist. We have actually also included extra suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and function spectacular scale information, regardless of the small scale.
The officially certified Nitto Trail Grappler M/T Tires provide a fantastic mix of off-road performance while still maintaining exceptional composure for on-road usage.
 

HINGED BODY SYSTEM
The hinged body system provides simple access to on-board parts. You can rapidly reach the battery and chassis by removing simply 2 body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller in size does not indicate the features require to do the same. No bushings found here, rather the drivetrain is easily spinning on sealed cartridge bearings throughout the entire automobile.
 

AXIAL AS-1 SERVO
Installed simply above the front axle is the Axial AS-1 servo, with a servo saver that enables guiding accuracy, while also supplying security for the servo gears in the event of a bind or effect.
 

Specifications

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (included)
Charger: USB LiPo battery charger (included)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No