Common Sense RC Lectron Pro 7.4V 450mAh 40C Lipo Battery with JST PH 2.0 connect

This 2-cell Lithium Polymer 450mAh battery pack is fantastic for lots of applications, and is a great alternative for lots of smaller sized drones and planes! Features a JST connector on the discharge leads and basic JST-XH balance leads. 40C constant discharge rate of 18 amps.

Dimensions:

Length: 53mm (2.08 in.)
Width: 30mm (1.18 in.)
Height: 9mm (0.35 in.)
Weight: 30g (1.05 oz)

Often bought with the product that you are currently reading about.

IC3 Battery to JST PH2.0 Device

Specifications

Accessory Type: Connectors & Adapters

Want an additional great product to compliment the above mentioned product?

SCX24 Motor w/ Pinion

Want an additional great product to compliment the above mentioned product?

USB Charger LiPo

Right here is a great product that numerous others have purchased the very same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Secret Features:
• Consists of radio system, ESC and transmitter batteries
• Consists of motor and on-board LiPo battery
• Reasonable narrow-stance rock crawler body in olive green or red
• Molded roll cage with sensible light bar
• Reasonable chauffeur figure and many other scale information
• Formally licensed KMC XD229 Machete Crawl wheels
• Formally licensed Nitto Path Grappler M/T tires (S30 compound, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts enable optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones supply strength and toughness
• Rugged steel C-channel frame rails with bracing keep whatever rigid and aligned
• Front and rear axles consist of a two-piece, molded plastic strong axle design
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated reservoir and resilient plastic suspension links provide tested Axial crawling performance
• Front and rear differentials each home a worm gear setup to power the axles and develop higher ground clearance. Worm gear drive likewise provides a low gear ratio to minimize torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the perfect rig to take along on your hiking, camping, and other outside and indoor experiences — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even brand-new modelers driving the SCX24 chassis will be well-equipped to tackle hard climbs and rough routes. Like the bigger SCX10™ chassis, this smaller sized variation utilizes plenty of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pressing onward and upward.

For the most reliable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The mix of coil-over shocks and resilient plastic suspension links provides Axial-worthy crawling performance even at this little scale. The worm gear drive setup allows a high ground clearance plus a low gear ratio that reduces torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt flaunts proficiency and charm on the routes. Have a look at that Deadbolt body — with its narrow position, bulging hood, sensible chauffeur figure, and molded roll cage with sensible light bar. The realism continues right down to the ground, where you’ll discover licensed KMC XD229 Machete Crawl wheels covered in Nitto Path Grappler tires.

Adding a lot more to its beginner appeal, the SCX24 Deadbolt comes 100% total and all set to run. Everything required for action is in package: assembled and ended up vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electric motor and 350mAh two 7.4V LiPo battery; USB LiPo battery charger; and even 4 AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (installed)
    (1) Dynamite® 88T brushed electric motor (installed)
    (1) Axial AS-1 steering servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Item Handbook




STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and tough steel c-channel frame rails with bracing to keep whatever intact and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the right amount of torque to assist rise steep climbs. It's mated to a steel motor install to keep flex to a minimum, which assists secure the gears.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm gear setup to get the power to the axles and develop higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones supply strength and toughness to keep things running during hard climbs and rough routes.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to enable optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the mix of coilover shocks with simulated tanks and resilient plastic suspension links provides the crawling performance you have actually known and get out of Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, formed plastic strong axle design. For optimum handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC enables you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the back which is enhanced to minimize axle steer and torque twist. We have actually likewise included extra suspension links for adjusting your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally licensed KMC XD Machete wheels are famous in the off-road world. They are formed in black and function stunning scale information, in spite of the little scale.
The officially certified Nitto Path Grappler M/T Tires offer a great blend of off-road performance while still maintaining outstanding composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system uses simple access to on-board parts. You can quickly reach the battery and chassis by removing just two body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller sized in size does not indicate the features need to follow suit. No bushings discovered here, rather the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.
 

AXIAL AS-1 SERVO
Installed just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering precision, while likewise supplying defense for the servo gears in the event of a bind or effect.
 

Specifications

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (included)
Charger: USB LiPo battery charger (included)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) diameter
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No