Common Sense RC Lectron Pro 7.4V 450mAh 40C Lipo Battery with JST PH 2.0 connect

This 2-cell Lithium Polymer 450mAh battery pack is excellent for tons of applications, and is a terrific choice for tons of smaller drones and airplanes! Functions a JST adapter on the discharge leads and standard JST-XH balance leads. 40C constant discharge rate of 18 amps.

Dimensions:

Length: 53mm (2.08 in.)
Width: 30mm (1.18 in.)
Height: 9mm (0.35 in.)
Weight: 30g (1.05 oz)

Regularly gotten with the product that you are currently reading about.

IC3 Battery to JST PH2.0 Device

Requirements

Accessory Type: Connectors & Adapters

Want an additional terrific product to compliment the above mentioned product?

SCX24 Motor w/ Pinion

Want an additional terrific product to compliment the above mentioned product?

USB Charger LiPo

Here is a terrific product that numerous others have actually purchased the same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Key Functions:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Practical narrow-stance rock spider body in olive green or red
• Molded roll cage with realistic light bar
• Practical motorist figure and numerous other scale details
• Formally licensed KMC XD229 Machete Crawl wheels
• Formally licensed Nitto Trail Grappler M/T tires (S30 compound, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones supply strength and toughness
• Rugged steel C-channel frame rails with bracing keep everything stiff and aligned
• Front and rear axles consist of a two-piece, molded plastic solid axle style
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated tank and resilient plastic suspension links deliver proven Axial crawling performance
• Front and rear differentials each house a worm gear setup to power the axles and develop greater ground clearance. Worm gear drive also provides a low gear ratio to decrease torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the ideal rig to take along on your hiking, outdoor camping, and other outside and indoor experiences — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even new modelers driving the SCX24 chassis will be fully equipped to take on difficult climbs up and rough trails. Like the larger SCX10™ chassis, this smaller version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pressing onward and upward.

For the most trustworthy handling, the SCX24 chassis includes a three-link front and four-link rear suspension. The combination of coil-over shocks and resilient plastic suspension links provides Axial-worthy crawling performance even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that reduces torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt shows off skills and charisma on the trails. Have a look at that Deadbolt body — with its narrow position, bulging hood, realistic motorist figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you’ll find licensed KMC XD229 Machete Crawl wheels covered in Nitto Trail Grappler tires.

Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% total and ready to run. Whatever required for action is in the box: assembled and completed car; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electrical motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (installed)
    (1) Dynamite® 88T brushed electrical motor (installed)
    (1) Axial AS-1 guiding servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh Two 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Handbook




STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything undamaged and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor provides the right amount of torque to help rise high climbs up. It's mated to a steel motor install to keep flex to a minimum, which helps safeguard the gears.
 


WORM GEARS
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and develop greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones supply strength and toughness to keep things running throughout difficult climbs up and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and resilient plastic suspension links provides the crawling performance you have actually understood and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a 2 piece, formed plastic solid axle style. For optimum handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two brilliant LED lights are consisted of and are installed in the front bumper. An extra LED light port on the ESC permits you to add optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry makes use of a 4-Link style for the back which is enhanced to decrease axle guide and torque twist. We have actually also consisted of extra suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally licensed KMC XD Machete wheels are famous in the off-road world. They are formed in black and feature spectacular scale details, regardless of the small scale.
The officially licensed Nitto Trail Grappler M/T Tires provide a fantastic blend of off-road performance while still keeping outstanding composure for on-road usage.
 

HINGED BODY SYSTEM
The hinged body system provides simple access to on-board components. You can quickly reach the battery and chassis by removing just two body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller in size doesn't indicate the features require to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire car.
 

AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that enables guiding accuracy, while also offering security for the servo gears in case of a bind or impact.
 

Requirements

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Charger: USB LiPo charger (consisted of)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No