Common Sense RC Lectron Pro 7.4V 450mAh 40C Lipo Battery with JST PH 2.0 connect

This 2-cell Lithium Polymer 450mAh battery pack is fantastic for lots of applications, and is a fantastic option for lots of smaller drones and airplanes! Functions a JST adapter on the discharge leads and basic JST-XH balance leads. 40C continuous discharge rate of 18 amps.

Dimensions:

Length: 53mm (2.08 in.)
Width: 30mm (1.18 in.)
Height: 9mm (0.35 in.)
Weight: 30g (1.05 oz)

Often acquired with the thing that you are currently reading about.

IC3 Battery to JST PH2.0 Device

Specifications

Device Type: Connectors & Adapters

Want one more wonderful thing to compliment the above pointed out thing?

SCX24 Motor w/ Pinion

Want one more wonderful thing to compliment the above pointed out thing?

USB Charger LiPo

Below is a wonderful thing that lots of others have bought at the exact same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Secret Functions:
• Consists of radio system, ESC and transmitter batteries
• Consists of motor and on-board LiPo battery
• Reasonable narrow-stance rock spider body in olive green or red
• Molded roll cage with practical light bar
• Reasonable chauffeur figure and numerous other scale details
• Officially certified KMC XD229 Machete Crawl wheels
• Officially certified Nitto Path Grappler M/T tires (S30 compound, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and sturdiness
• Rugged steel C-channel frame rails with bracing keep everything rigid and lined up
• Front and rear axles consist of a two-piece, molded plastic strong axle style
• 3-Link front and 4-link rear suspension supply optimal handling
• Coil-over shocks with simulated reservoir and durable plastic suspension links provide proven Axial crawling efficiency
• Front and rear differentials each home a worm equipment setup to power the axles and create higher ground clearance. Worm equipment drive likewise offers a low equipment ratio to reduce torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the best rig to bring on your hiking, outdoor camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even brand-new modelers driving the SCX24 chassis will be well-equipped to tackle difficult climbs and rough trails. Like the larger SCX10™ chassis, this smaller version uses plenty of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward.

For the most trustworthy handling, the SCX24 chassis features a three-link front and four-link rear suspension. The mix of coil-over shocks and durable plastic suspension links provides Axial-worthy crawling efficiency even at this little scale. The worm equipment drive setup allows a high ground clearance plus a low equipment ratio that decreases torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt displays competence and charisma on the trails. Have a look at that Deadbolt body — with its narrow position, bulging hood, practical chauffeur figure, and molded roll cage with practical light bar. The realism continues right down to the ground, where you’ll find certified KMC XD229 Machete Crawl wheels covered in Nitto Path Grappler tires.

Adding a lot more to its newbie appeal, the SCX24 Deadbolt comes 100% complete and all set to run. Whatever required for action is in package: put together and completed vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electrical motor and 350mAh 2S 7.4V LiPo battery; USB LiPo battery charger; and even four AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (set up)
    (1) Dynamite® 88T brushed electrical motor (set up)
    (1) Axial AS-1 steering servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh Two 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Product Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor offers the correct amount of torque to assist rise high climbs. It's mated to a steel motor install to keep flex to a minimum, which assists protect the equipments.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm equipment setup to get the power to the axles and create higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles in addition to steel dogbones provide strength and sturdiness to keep things running during difficult climbs and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the mix of coilover shocks with simulated reservoirs and durable plastic suspension links provides the crawling efficiency you have actually known and get out of Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a 2 piece, formed plastic strong axle style. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 brilliant LED lights are included and are installed in the front bumper. An additional LED light port on the ESC enables you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link style for the back which is optimized to reduce axle steer and torque twist. We have actually likewise included additional suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially certified KMC XD Machete wheels are legendary in the off-road world. They are formed in black and feature stunning scale details, regardless of the little scale.
The formally accredited Nitto Path Grappler M/T Tires provide a wonderful blend of off-road efficiency while still maintaining outstanding composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system provides easy access to on-board parts. You can quickly reach the battery and chassis by eliminating just two body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller in size does not mean the features need to do the same. No bushings discovered here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.
 

AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while likewise offering security for the servo equipments in case of a bind or impact.
 

Specifications

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (included)
Charger: USB LiPo battery charger (included)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) diameter
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No