Common Sense RC Lectron Pro 7.4V 450mAh 40C Lipo Battery with JST PH 2.0 connect

This 2-cell Lithium Polymer 450mAh battery pack is great for lots of applications, and is a terrific choice for lots of smaller drones and airplanes! Features a JST port on the discharge leads and standard JST-XH balance leads. 40C constant discharge rate of 18 amps.

Dimensions:

Length: 53mm (2.08 in.)
Width: 30mm (1.18 in.)
Height: 9mm (0.35 in.)
Weight: 30g (1.05 oz)

Frequently purchased with the thing that you are presently reviewing.

IC3 Battery to JST PH2.0 Device

Specs

Device Type: Connectors & Adapters

Want another wonderful thing to compliment the above pointed out thing?

SCX24 Motor w/ Pinion

Want another wonderful thing to compliment the above pointed out thing?

USB Charger LiPo

Below is a wonderful thing that many others have bought at the same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Secret Features:
• Consists of radio system, ESC and transmitter batteries
• Consists of motor and on-board LiPo battery
• Sensible narrow-stance rock spider body in olive green or red
• Molded roll cage with practical light bar
• Sensible chauffeur figure and numerous other scale details
• Officially licensed KMC XD229 Machete Crawl wheels
• Officially licensed Nitto Path Grappler M/T tires (S30 compound, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts permit optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones offer strength and sturdiness
• Rugged steel C-channel frame rails with bracing keep whatever stiff and aligned
• Front and rear axles consist of a two-piece, molded plastic solid axle style
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated tank and resilient plastic suspension links provide proven Axial crawling efficiency
• Front and rear differentials each home a worm equipment setup to power the axles and develop greater ground clearance. Worm equipment drive also offers a low equipment ratio to decrease torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the ideal rig to take along on your hiking, camping, and other outdoor and indoor experiences — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even new modelers driving the SCX24 chassis will be fully equipped to deal with difficult climbs up and rough tracks. Like the larger SCX10™ chassis, this smaller version uses plenty of steel elements — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pressing onward and upward.

For the most reputable handling, the SCX24 chassis includes a three-link front and four-link rear suspension. The mix of coil-over shocks and resilient plastic suspension links provides Axial-worthy crawling efficiency even at this little scale. The worm equipment drive setup permits a high ground clearance plus a low equipment ratio that lowers torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt shows off skills and charm on the tracks. Check out that Deadbolt body — with its narrow stance, bulging hood, practical chauffeur figure, and molded roll cage with practical light bar. The realism continues right down to the ground, where you’ll discover licensed KMC XD229 Machete Crawl wheels covered in Nitto Path Grappler tires.

Adding much more to its newbie appeal, the SCX24 Deadbolt comes 100% total and ready to run. Whatever required for action is in package: assembled and ended up vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electrical motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even 4 AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (set up)
    (1) Dynamite® 88T brushed electrical motor (set up)
    (1) Axial AS-1 guiding servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh Two 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Handbook




STEEL C-CHANNEL CHASSIS FRAME RAILS
Much like the 1/10th scale SCX10™ platform, the SCX24™ chassis functions rugged and durable steel c-channel frame rails with bracing to keep whatever undamaged and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor offers the right amount of torque to assist ascend high climbs up. It's mated to a steel motor mount to keep flex to a minimum, which assists secure the gears.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm equipment setup to get the power to the axles and develop greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles together with steel dogbones offer strength and sturdiness to keep things running during difficult climbs up and rough tracks.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to permit optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the mix of coilover shocks with simulated tanks and resilient plastic suspension links provides the crawling efficiency you have actually known and anticipate from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, molded plastic solid axle style. For optimum handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 brilliant LED lights are consisted of and are mounted in the front bumper. An extra LED light port on the ESC permits you to add optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link style for the back which is enhanced to decrease axle guide and torque twist. We have actually also consisted of extra suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially licensed KMC XD Machete wheels are famous in the off-road world. They are molded in black and feature sensational scale details, regardless of the little scale.
The officially licensed Nitto Path Grappler M/T Tires offer a wonderful mix of off-road efficiency while still retaining exceptional composure for on-road usage.
 

HINGED BODY SYSTEM
The hinged body system offers easy access to on-board elements. You can quickly reach the battery and chassis by eliminating simply two body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller in size does not imply the functions need to do the same. No bushings discovered here, rather the drivetrain is easily spinning on sealed cartridge bearings throughout the whole vehicle.
 

AXIAL AS-1 SERVO
Mounted simply above the front axle is the Axial AS-1 servo, with a servo saver that enables guiding accuracy, while also offering defense for the servo gears in the event of a bind or effect.
 

Specs

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Battery charger: USB LiPo charger (consisted of)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No