Common Sense RC Lectron Pro 7.4V 450mAh 40C Lipo Battery with JST PH 2.0 connect

This 2-cell Lithium Polymer 450mAh battery pack is great for tons of applications, and is a great alternative for tons of smaller sized drones and aircrafts! Features a JST connector on the discharge leads and basic JST-XH balance leads. 40C constant discharge rate of 18 amps.

Dimensions:

Length: 53mm (2.08 in.)
Width: 30mm (1.18 in.)
Height: 9mm (0.35 in.)
Weight: 30g (1.05 oz)

Frequently bought with the thing that you are presently checking out.

IC3 Battery to JST PH2.0 Device

Specifications

Accessory Type: Connectors & Adapters

Want one more great thing to compliment the above discussed thing?

SCX24 Motor w/ Pinion

Want one more great thing to compliment the above discussed thing?

USB Charger LiPo

Here is a great thing that many others have bought at the very same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Key Features:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Reasonable narrow-stance rock crawler body in olive green or red
• Molded roll cage with reasonable light bar
• Reasonable driver figure and numerous other scale information
• Formally licensed KMC XD229 Machete Crawl wheels
• Formally licensed Nitto Trail Grappler M/T tires (S30 compound, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones supply strength and durability
• Rugged steel C-channel frame rails with bracing keep everything stiff and aligned
• Front and rear axles include a two-piece, molded plastic strong axle style
• 3-Link front and 4-link rear suspension supply ideal handling
• Coil-over shocks with simulated tank and durable plastic suspension links provide proven Axial crawling efficiency
• Front and rear differentials each home a worm gear setup to power the axles and create higher ground clearance. Worm gear drive likewise offers a low gear ratio to reduce torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the perfect rig to bring on your hiking, outdoor camping, and other outside and indoor experiences — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even brand-new modelers driving the SCX24 chassis will be well-equipped to deal with hard climbs and rough trails. Like the larger SCX10™ chassis, this smaller sized variation uses plenty of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pressing onward and upward.

For the most trustworthy handling, the SCX24 chassis includes a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links provides Axial-worthy crawling efficiency even at this little scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that lowers torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. Have a look at that Deadbolt body — with its narrow stance, bulging hood, reasonable driver figure, and molded roll cage with reasonable light bar. The realism continues right down to the ground, where you’ll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.

Adding a lot more to its newbie appeal, the SCX24 Deadbolt comes 100% total and all set to run. Everything needed for action is in the box: put together and ended up automobile; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electric motor and 350mAh two 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (installed)
    (1) Dynamite® 88T brushed electric motor (installed)
    (1) Axial AS-1 guiding servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh Two 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Much like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and strong steel c-channel frame rails with bracing to keep everything undamaged and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor offers the correct amount of torque to assist ascend steep climbs. It's mated to a steel motor mount to keep flex to a minimum, which helps secure the gears.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles together with steel dogbones supply strength and durability to keep things running throughout hard climbs and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the combination of coilover shocks with simulated tanks and durable plastic suspension links provides the crawling efficiency you've known and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a two piece, formed plastic strong axle style. For ideal handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 bright LED lights are included and are mounted in the front bumper. An additional LED light port on the ESC allows you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link style for the back which is optimized to reduce axle guide and torque twist. We've likewise included additional suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally licensed KMC XD Machete wheels are famous in the off-road world. They are formed in black and function stunning scale information, in spite of the little scale.
The officially licensed Nitto Trail Grappler M/T Tires provide a wonderful blend of off-road efficiency while still retaining excellent composure for on-road usage.
 

HINGED BODY SYSTEM
The hinged body system provides simple access to on-board parts. You can rapidly reach the battery and chassis by removing just two body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller sized in size does not imply the features require to do the same. No bushings discovered here, rather the drivetrain is freely spinning on sealed cartridge bearings throughout the whole automobile.
 

AXIAL AS-1 SERVO
Installed just above the front axle is the Axial AS-1 servo, with a servo saver that enables guiding precision, while likewise offering security for the servo gears in the event of a bind or effect.
 

Specifications

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (included)
Battery charger: USB LiPo charger (included)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No