Common Sense RC Lectron Pro 7.4V 450mAh 40C Lipo Battery with JST PH 2.0 connect

This 2-cell Lithium Polymer 450mAh battery pack is fantastic for lots of applications, and is an excellent option for lots of smaller sized drones and airplanes! Features a JST port on the discharge leads and basic JST-XH balance leads. 40C continuous discharge rate of 18 amps.

Dimensions:

Length: 53mm (2.08 in.)
Width: 30mm (1.18 in.)
Height: 9mm (0.35 in.)
Weight: 30g (1.05 oz)

Often purchased with the thing that you are presently reviewing.

IC3 Battery to JST PH2.0 Device

Specifications

Accessory Type: Connectors & Adapters

Want another fantastic thing to compliment the above discussed thing?

SCX24 Motor w/ Pinion

Want another fantastic thing to compliment the above discussed thing?

USB Charger LiPo

Right here is a fantastic thing that numerous others have actually bought at the very same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Key Features:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Practical narrow-stance rock spider body in olive green or red
• Molded roll cage with reasonable light bar
• Practical chauffeur figure and many other scale information
• Formally licensed KMC XD229 Machete Crawl wheels
• Formally licensed Nitto Path Grappler M/T tires (S30 substance, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts permit maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones offer strength and resilience
• Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
• Front and rear axles consist of a two-piece, molded plastic solid axle design
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated reservoir and durable plastic suspension links deliver tested Axial crawling performance
• Front and rear differentials each home a worm gear setup to power the axles and develop higher ground clearance. Worm gear drive also supplies a low gear ratio to lower torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the perfect rig to take along on your hiking, camping, and other outside and indoor experiences — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even new modelers driving the SCX24 chassis will be fully equipped to take on tough climbs up and rough routes. Like the larger SCX10™ chassis, this smaller sized variation utilizes plenty of steel elements — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pressing onward and upward.

For the most dependable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm gear drive setup allows a high ground clearance plus a low gear ratio that decreases torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt displays skills and charisma on the routes. Check out that Deadbolt body — with its narrow position, bulging hood, reasonable chauffeur figure, and molded roll cage with reasonable light bar. The realism continues right down to the ground, where you’ll discover licensed KMC XD229 Machete Crawl wheels covered in Nitto Path Grappler tires.

Adding much more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Whatever needed for action is in the box: assembled and ended up vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even 4 AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (installed)
    (1) Dynamite® 88T brushed electric motor (installed)
    (1) Axial AS-1 steering servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis functions rugged and tough steel c-channel frame rails with bracing to keep everything intact and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor supplies the correct amount of torque to assist rise high climbs up. It's mated to a steel motor install to keep flex to a minimum, which assists safeguard the equipments.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm gear setup to get the power to the axles and develop higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles in addition to steel dogbones offer strength and resilience to keep things running throughout tough climbs up and rough routes.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to permit maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you've known and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a 2 piece, molded plastic solid axle design. For optimum handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 intense LED lights are consisted of and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the back which is optimized to lower axle guide and torque twist. We've also consisted of extra suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale information, despite the small scale.
The formally accredited Nitto Path Grappler M/T Tires provide a wonderful mix of off-road performance while still keeping excellent composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system uses simple access to on-board elements. You can quickly reach the battery and chassis by getting rid of simply two body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller sized in size does not mean the functions need to do the same. No bushings found here, rather the drivetrain is freely spinning on sealed cartridge bearings throughout the whole vehicle.
 

AXIAL AS-1 SERVO
Installed simply above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also supplying security for the servo equipments in case of a bind or effect.
 

Specifications

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Charger: USB LiPo charger (consisted of)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) diameter
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No