Castle Creations Talon 15, 15Amp, 4S Max, Heavy Duty Bec

This is the Talon 15 Mini ESC from Castle Creations.

FEATURES:
Designed for use in electrical RC helis or aircrafts bring up to
    15 amps
8amp peak, 3amp continuous BEC deals with high drain servos
Castle Link suitable, Portable Programmer Air Card offered independently-
    CSEM6301
One year limited service warranty through Castle Creations beginning at date
    of purchase

INCLUDES:
Talon 15 Mini ESC with Receiver Connector and Instructions

REQUIRES:
Motor ports of modeler's option
Soldering iron for attaching ports

SPECIFICATIONS:
Input Voltage: 2-4S LiPo
Max Constant Amperage: 15A (at complete throttle)
BEC Voltage: 5.5V
BEC Output Amperage: 8 amp peak, 3 amp continuous
Measurements: 0.58 x 1.10 x 0.32" (14.7 x 27.9mm x 8.1mm)
Weight with Wires: 0.25oz (7.2g)
Weight without Wires: 0.12oz (3.4g)

Numerous others have purchased this product in addition to the product that you are currently reviewing.

1400Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Co

Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or small Multi-Rotor frames with Hobbywing 6A esc.

An excellent motor for airplanes approximately 220 grams (8 oz) using 2 li-poly cells. Extremely lightweight at 19 grams including important prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and important firewall program install. Great for small 3D airplanes weighing around 6 oz, or aerobatic airplanes approximately 8 oz. Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.

The motor includes a 3mm solidified steel shaft, dual ball bearings, important prop saver for APC E props and important firewall program install flange. Keep in mind that the prop saver is sized for APC props. GWS props will need some adjustment to fit properly. Countersunk mounting holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. performance present: 2-6 Amp
NoLoad current / 0.3 Amp
Existing capability: 7.5 A/60 s
Max. Performance: 74%
Weight with cables: 19g
Measurements (mm): 27.6x11.5

Recomended design weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5