Castle Creations Talon 15, 15Amp, 4S Max, Heavy Duty Bec

This is the Talon 15 Mini ESC from Castle Creations.

FEATURES:
Developed for use in electric RC helis or airplanes bring up to
    15 amps
8amp peak, 3amp continuous BEC manages high drain servos
Castle Link compatible, Portable Programmer Air Card sold separately-
    CSEM6301
One year limited guarantee through Castle Creations beginning at date
    of purchase

INCLUDES:
Talon 15 Mini ESC with Receiver Adapter and Recommendations

REQUIRES:
Motor adapters of modeler's option
Soldering iron for connecting adapters

SPECIFICATIONS:
Input Voltage: 2-4S LiPo
Max Continuous Amperage: 15A (at full throttle)
BEC Voltage: 5.5V
BEC Output Amperage: 8 amp peak, 3 amp continuous
Measurements: 0.58 x 1.10 x 0.32" (14.7 x 27.9mm x 8.1mm)
Weight with Wires: 0.25oz (7.2g)
Weight without Wires: 0.12oz (3.4g)

Several others have acquired this product together with the product that you are presently reviewing.

1400Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Co

Suitable for indoor 3D Flight, 220g and under, with 10A speed controller or small Multi-Rotor frames with Hobbywing 6A esc.

An excellent motor for airplanes as much as 220 grams (8 oz) utilizing 2 li-poly cells. Extremely light-weight at 19 grams consisting of essential prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and essential firewall software install. Great for small 3D airplanes weighing around 6 oz, or aerobatic airplanes as much as 8 oz. Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.

The motor features a 3mm solidified steel shaft, dual ball bearings, essential prop saver for APC E props and essential firewall software install flange. Note that the prop saver is sized for APC props. GWS props will need some adjustment to fit effectively. Countersunk mounting holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. performance present: 2-6 Amp
NoLoad current / 0.3 Amp
Existing capacity: 7.5 A/60 s
Max. Efficiency: 74%
Weight with cables: 19g
Measurements (mm): 27.6x11.5

Recomended model weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5