Castle Creations Mamba X Sensored 25.2V Wp Esc 1406-7700Kv Combo

This is the Castle Creations Mamba X Extreme 1/10 scale Water resistant ESC,
and the 1406 7700Kv Sensored Brushless Motor.
NOT for use in 2WD or 4WD brief course trucks.

For 1/10 scale 2WD automobiles on 2S LiPos, and lighter off-road 1/10 scale
    arena trucks and buggies with conservative gearing.

FEATURES:
ESC;
2S - SIX input voltage variety
Suitable with 1/10 - 1/8 scale lorries weighing less that 9lbs
    (4kg), consisting of many extreme 1/10 scale setups and 1/8 scale race
    buggies
Smartsense utilizes motor's sensors for smooth starts, outstanding torque
    and low-speed drivability - then transitions to the sensorless
    mode with electronic timing, Smartsense immediately advances
    timing for peak efficiency during all owning conditions
On-the-fly modifications can be made through the AUX wire when allowed
    in Castle Link, then settings can be tuned from transmitter while
    owning
Recordable real-time information such as RPM, battery existing and voltage,
    ESC and motor temperature, throttle input and more
Audible notifies
CNC aluminum case
12AWG high strand count silicone insulated battery wires
One year limited warranty through Castle Creations beginning at date
    of purchase

    Motor;
High-strength neodymium sintered magnet with Kevlar wrap
High-performance 0.2mm steel lamination stacked stator
Castle 13 AWG silicone insulated wire leads
Large NMB bearings
4 pole configuration for optimal effectiveness at high RPM
CNC machined 6061-T6 aluminum front and rear endbells

INCLUDES:
Mamba X Severe 1/10 scale Electronic Speed Control
Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector,
    and Waterproof Change
Replaceable Motor Sensing unit Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated Bullet Motor Connectors
1406 7700Kv Sensing united Brushless Motor
Sensor Wire

SPECS:
ESC (CSEM9500);
Input Voltage Variety: 2S - SIX LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Totally programmable with Castle Link USB Adapter, and
    downloadable Casle Link Windows software application
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be disabled for racing
Cooling Fan: 1.2" (30mm) removable
Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Car Weight: 9lbs (4kg) with batteries, all set to
    run

    Motor (CSEC5900);
Input Voltage Variety: 2-3S LiPo,
Kv: 7700
Max. RPM: 100,000
Max. Advised Car Weight: 4lbs (1814g) with battery RTR
Length: 1.9" (49.5mm)
Diameter: 1.4" (36mm)
Weight with Wires: 6.9oz (197g)
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.59" (15mm)
Mounting Hole Specifications: M3 @ 25mm
Connectors: 4mm Male Castle Bullet

REMARKS:
Water resistant under typical operation. Not intended for operation when
    entirely immersed in water.