Castle Creations Mamba X Sct Sensored 25.2V Wp Esc & 1415-2400Kv Combo

This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC,
with the 1415 2400Kv Brushless Motor with 1/8" 3.17mm Output Shaft.

**Perfect for 1/10 scale 2WD and 4WD brief course trucks as much as 6.5pounds**
**using 3 or 4S LiPo power.

FEATURES:
ESC;
2S - SIX input voltage variety
Smartsense uses motor's sensing units for smooth starts, exceptional torque
    and low-speed drivability - then shifts to the sensorless
    mode with electronic timing, Smartsense automatically advances
    timing for peak efficiency throughout all owning conditions
On-the-fly modifications can be made through the AUX wire once made it possible for
    in Castle Link, then settings can be tuned from transmitter while
    owning
Recordable real-time information such as RPM, battery present and voltage,
    ESC and motor temperature, throttle input and more
Audible informs
CNC aluminum case
12AWG high strand count silicone insulated battery wires
One year restricted service warranty through Castle Creations starting at date
    of purchase
    Motor;
High-strength 180°C grade neodymium sintered magnets with high-
    strength wrap
High-temperature, high purity copper windings
High-performance 0.2mm steel lamination stacked stator
Vibration dampening wave spring on shaft
Rotor position sensor eliminates cogging and disparity throughout
    startup
CNC machined 6061 T-6 aluminum endbells and motor can
13AWG high strand count silicone insulated wires with 4mm male bullet
    connectors
4 pole configuration for optimal effectiveness at high RPM
HOLLER basic sensor port and labeled connections
Exchangeable front end bell/bearing assembly and rotor/shaft assembly

CONSISTS OF:
Mamba X Extreme 1/10 scale Electronic Speed Control
Exchangeable Wire Harness with Receiver Wire, AUX Wire, Fan Connector,
    and Waterproof Change
Exchangeable Motor Sensing unit Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated male and Female Bullet Motor Connectors
1415 1Y 2400Kv 4-Pole Sensing united Brushless Motor w/1/8" 3.17mm Shaft
Sensor Wire
Three 3x5mm Socket Head Cap Screws

SPECS:
ESC, CSEM9500
Input Voltage Variety: 2S - SIX LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Fully programmable with Castle Link USB Adapter, and
    downloadable Castle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, might be disabled for racing
Cooling Fan: 1.2" (30mm) detachable
Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, prepared to
    run
    Motor; CSEC6000
Input Voltage Variety: 3-4S LiPo
Kv: 2400
Max RPM: 75,000
Length: 2.7" (69.5mm)
Size: 1.4" (36mm)
Shaft Size: 1/8" (3.17mm)
Shaft Length: 0.61" (15.5mm)
Weight: 11.2oz (318g)
Mounting Hole Size: M3 @ 25mm

REMARKS:
Waterproof under regular operation. Not planned for operation when
    completely immersed in water.