Castle Creations Mamba Micro X 12.6V Esc, 2A Peak Bec

This is the Castle Creations Mamba Micro X Waterproof Electronic Speed Control

FEATURES:
For 1/18 scale 2 or 4 wheel drive automobiles weighing approximately
    2.25pounds (1.02kg)
Heavy-duty BEC (battery remover circuit) deals with high-draw
    digital servos
Adjustable settings consist of;
    Throttle Punch Control
    Braking Curve Reverse Type
    Drag Brake Motor Type
    Vehicle LiPo Cutoff
Programmable Auxiliary Wire (AUX) allows modifications to numerous
    settings such as torque control and max throttle from a suitable
    transmitter

CONSISTS OF:
Mamba Micro ESC
Motor Leads with 3.5mm Bullet Connectors
Pretinned Battery Leads (need connector to mate w/selected
    battery, 4mm Castle Creations adapters advised)
On/Off Switch
Receiver Port
Guideline Booklet

REQUIRES:
Compatible Motor and LiPo Battery, advised battery capacity for
    1/18 scale automobiles is 1500mAh, 30C or higher constant
    discharge

SPECIFICATIONS:
Input Voltage Variety: Minutes. TWO LiPo, Max. 3S, 12.6V
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Brake: Proportional
Reversible: Yes, with lockout
On/Off Switch: Waterproof
Dimensions: 1.61 x 0.75 x 1.10" (41 x 19 x 28mm)
Weight: 1.20oz (34.01g) without connector

REMARKS:
Not intended for operation while submerged in liquid. If system is
    operated in damp conditions, wash with fresh water to eliminate
    dirt or corrosives, then completely dry system.