Castle Creations Mamba X 25.2V Waterproof Esc And 1406-2200Kv Sensored Motor Comb

This is the Castle Creations Mamba X Extreme 1/10 scale Water resistant ESC
with the 1406 4-Pole 2280Kv Sensored Brushless Motor.

FEATURES:
Suitable for low speed crawling or path ruinning in vehicles
    weighing as much as 9lbs (4.1kg) on Twos to 4s LiPos, can also be utilized in
    more aggressive setups such as rock racing and extended hill
    climbing on vehicles as much as 5lbs (2.3kg)

    ESC;
2S - 6S input voltage variety
Smartsense utilizes motor's sensing units for smooth starts, excellent torque
    and low-speed drivability - then transitions to the sensorless
    mode with electronic timing, Smartsense automatically advances
    timing for peak performance during all owning conditions
On-the-fly changes can be made through the AUX wire when enabled
    in Castle Link, then settings can be tuned from transmitter while
    owning
Recordable real-time information such as RPM, battery existing and voltage,
    ESC and motor temperature level, throttle input and more
Audible notifies
CNC aluminum case
12AWG high hair count silicone insulated battery wires

    Motor;
4 pole 12 slot design for high degree of efficiency and less heat
SMARTSENSE utilizes motor's sensing units to supply smooth starts, excellent
    torque and low-speed drivability-once motor is turning it
    transitions to sensorless mode
QUIETSENSE innovation shields sensing units from magnetic field sound
    produced from the motor coils keeping motor and ESC in sync at all
    times
HOLLER standard sensor port and labeled connections
High performance 0.2mm steel lamination stacked stator
CNC machined anodized 6061 T-6 aluminum motor can and endbells
Rebuildable design allows replacement of front end bell/bearing
    assembly or rotor/shaft assembly
One year minimal guarantee through Castle Creations beginning at date
    of purchase

INCLUDES:
Mamba X Extreme 1/10 scale Electronic Speed Control
1406-2280Kv Sensored Brushless Spider Motor
8.3" (210mm) length Sensing unit Wire for Sensing united Operation
Castle Sensor Harness Adapter
Coupon for free Castle Link USB Adapter
Chauffeur's Ed and Flying start Guides
Castle Decal Sheet

NEEDS:
Battery ports to match chosen battery

SPECIFICATIONS:
ESC, CSEM9500:
Input Voltage Variety: 2S - 6S LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Fully programmable with Castle Link USB Adapter, and
    downloadable Castle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, might be handicapped for racing
Cooling Fan: 1.2" (30mm) detachable
Measurements: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Automobile Weight: 9lbs (4kg) with batteries, all set to
    run

    Motor, CSEC6900
Input Voltage Variety: 2-4S LiPo
Kv: 2280
Max RPM: 100,000
Length: 1.9" (49.5mm)
Size: 1.4" (36mm)
Weight: 6.9oz (197g)
Shaft Length: 0.59" (15mm)
Shaft Size: 1.8" (3.17mm)
Mounting Hole Specs: M3 @ 25mm
Connectors: 4mm Male Castle Bullet Connectors connected to 13 gauge
    wire
Sensing unit Wire Length: 8.3" (210mm)