Castle Creations Field Link Portable Programmer Surface

This is the Field Link Portable Developer Vehicle Card from Castle Creations.

FEATURES:
Programs Castle car controllers without a computer
Works as a complete USB Castle Relate to your computer system
Works with all Castle Link compatible car items

INCLUDES:
One Field Link Portable Developer Card
One USB cable

REQUIRES:
Windows PC
Castle Link Software application (readily available at www.castlecreations.com)

SPECS:
Length: 55mm (2.2")
Width: 85mm (3.3")
Thickness: 5mm (0.20")

COMMENTS:
Will only deal with Castle controller firmware released after 2007

This product praises the above talked about product.

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide surface area, gold-plated terminals
Reverse polarity security makes it difficult to connect in reverse
Textured surface for simple gripping
Suitable with high-current 12-gauge wire
Secure, positive locking spring packed terminals for consistent
    contact
Multiple locking barbs keep terminals protect

INCLUDES:
One black female plastic port
One black male plastic port
2 sets of gold metal pins
Guideline sheet

REQUIRES:
Soldering wires to the metal pins

Here is a great product that several others have purchased the exact same time.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs only (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide surface area, gold-plated terminals
Reverse polarity security makes it difficult to connect in reverse
Textured surface for simple gripping
Suitable with high-current 12-gauge wire
Safe and secure positive locking spring packed terminals for consistent
    contact
Multiple locking barbs keep terminals protect

INCLUDES:
2 black male plastic connectors
2 sets of gold metal pins
Guideline sheet

REQUIRES:
Soldering wires to the metal pins

Get this product to enhance the one you are reading around.



This is a low-resistance, compact-size 2-Pin Ultra Plug Adapter from Deans.
This design removes the possiblility of reverse polarity connections.
Provides a secure connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

REQUIRES:
Soldering connectors onto wires

Frequently bought with the product that you are currently checking out.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Adapter
from Deans.

FEATURES:
This design removes the possiblility of reverse polarity
connections
Provides a secure connection for battery and motor connections

INCLUDES:
2 2-Pin Male Ultra Plug
4 short pieces of Black shrink tubing

REQUIRES:
Soldering to wire
Soldering Iron, HCAR0775

COMMENTS:
For Female end usage WSDM1303
For both Male and Female usage WSDM3001

Many others have bought this product together with the product that you are currently checking out.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for usage in heavier
    cars such as E-Revos or E-Maxx class cars)
USB programs capability through Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for usage in nearly every environment (not planned for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes numerous stock brushed motors
4 magnet, 4 pole rotor for greater torque
1.4" size slotted stator
Detachable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Adapter,
    On/Off Switch, Directions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery port of modeler's option

SPECS:
ESC;
Input Voltage: 2S LiPo minimum, THREE LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Adapter: 4mm gold
Wire Length: 9.5" (241mm)