Castle Creations Castle Creations Talon 25 Brushless ESC

This is the Castle Creations Talon 25 Brushless ESC. This compact controller can keep it?s cool even throughout the most extreme 3D maneuvers. Talon 25 is intended for use in most 400-size helicopter setups running up to 6S LiPo or your preferred 3D foamie that pulls up to 25 amps. Despite it's size, it boasts an impressive 8 amp peak/3 amp constant BEC, keeping even the most draining pipes servos at ease. Talon 25 also offers Castle?s industry-leading helicopter functions, not to discuss easy programs using the Castle Link USB adapter (coupon totally free Castle Link included). Talon 25 suggestions the scales at a simple 18 grams!

Talon 25 Specs:

Input voltage:

MIN: TWO LiPo
MAX: 6S LiPo

Max constant amperage at complete throttle: 25 amps*
BEC voltage (voltage regulator for powering radio and servos): 5.5 volts
BEC output:

8 amp peak**
3 amp constant (constantly check servo draw prior to first flight)

Dimensions:

Width: .72" (18.2mm)
Length: 1.72" (43.7mm)
Depth: 0.32" (8.1mm)
Weight (with wires): 0.63 oz. (17.9g)
Weight (without wires): 0.28 oz (7.9g)

Products needed for operation or installation: Battery and motor adapters (sold independently)
Programmability: Fully programmable Castle function set using Castle Link USB adapter (coupon totally free Castle Link adapter included in bundle) and freely downloadable Castle Link Windows software.
*RC HOBBY APPLICATION SCORE: 25 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 miles per hour air flow of 25C (77F) or cooler air. Controller temperature level should never ever surpass 100C (212F). Surpassing existing or temperature level scores might damage parts and might reduce the life of the ESC. Constantly validate system existing draw at full-throttle. Decline load or boost air flow to reduce the ESC?s running temperature level.

**Peak indicates amperage sustainable for most servos? existing draw transients. Constantly confirm servo existing draw before the first flight of the model.

Often gotten with the item that you are presently reading about.

LIPO 860mAh 11.1V 35C

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a brand-new level of power to the RC scene, based upon cutting edge lithium polymer technology, and taking advantage of all the technological gains within this remarkable industry. Pulse has to do with power & performance at a cost that can be afforded. No more does exceptional power come at a premium cost – Pulse provides everything in one pulse accelerating punch.

Delivering extreme power for your RC applications, Pulse batteries deliver everything you could think of at a cost never ever seen. Adding to the addictive power of Pulse Ultra batteries is the 5C charge rate, permitting you to recharge in rapid succession, leaving previous 1C LiPo batteries back at the charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every method possible, delivering mind numbing power levels that will take your flight to a totally brand-new level of extreme. If you're looking for power, you just discovered it. Pulse provides extreme power for extreme pilots, when it comes to value, Pulse merely can't be beat.
Feel the pulse, and get hold of a brand-new Pulse Ultra Battery for your 3D needs!



Specs:
Voltage: 11.1V
Cell Count: THREE
Capacity: 860mAh
Discharge Rate: 35C
Charge Rate:
Dimensions: 58mm x 31mm x 24.5mm (LxWxH)
Weight:
Balance Tap: JST-XH

Item Note:
Pulse batteries do not included power leads, and will need completion user to solder their own design of battery connector for the battery to be properly used. Pulse batteries come with bare leads covered with heat diminish protection, and are all set for the connector of choice to be soldered to the positive/negative leads.