Castle Creations Castle Creations Talon 25 Brushless ESC

This is the Castle Creations Talon 25 Brushless ESC. This compact controller can keep it?s cool even throughout the most extreme 3D maneuvers. Talon 25 is intended for usage in the majority of 400-size helicopter setups adding to SIX LiPo or your preferred 3D foamie that pulls up to 25 amps. In spite of it's size, it boasts an excellent 8 amp peak/3 amp constant BEC, keeping even the most draining servos at ease. Talon 25 likewise offers Castle?s industry-leading helicopter functions, not to discuss easy shows using the Castle Link USB adapter (voucher totally free Castle Link included). Talon 25 tips the scales at a mere 18 grams!

Talon 25 Specs:

Input voltage:

MIN: TWO LiPo
MAX: SIX LiPo

Max constant amperage at full throttle: 25 amps*
BEC voltage (voltage regulator for powering radio and servos): 5.5 volts
BEC output:

8 amp peak**
3 amp constant (always examine servo draw prior to very first flight)

Dimensions:

Width: .72" (18.2mm)
Length: 1.72" (43.7mm)
Depth: 0.32" (8.1mm)
Weight (with wires): 0.63 oz. (17.9g)
Weight (without wires): 0.28 oz (7.9g)

Items needed for operation or setup: Battery and motor adapters (sold separately)
Programmability: Fully programmable Castle function set using Castle Link USB adapter (voucher totally free Castle Link adapter included in package) and freely downloadable Castle Link Windows software.
*RC HOBBY APPLICATION SCORE: 25 amps throughout of a single 4,000 mAh battery pack with the ESC in contact with a 5 miles per hour air flow of 25C (77F) or cooler air. Controller temperature need to never exceed 100C (212F). Going beyond existing or temperature ratings might harm components and might reduce the life of the ESC. Constantly verify system existing draw at full-throttle. Decrease load or increase air flow to reduce the ESC?s operating temperature.

**Peak suggests amperage sustainable for the majority of servos? existing draw transients. Constantly verify servo existing draw before the very first flight of the model.

Frequently gotten with the thing that you are currently checking out.

LIPO 860mAh 11.1V 35C

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a new level of power to the RC scene, based upon cutting edge lithium polymer technology, and benefiting from all the technological gains within this incredible market. Pulse is about power & efficiency at an expense that can be paid for. No longer does premium power come at a premium rate – Pulse delivers everything in one pulse accelerating punch.

Delivering extreme power for your RC applications, Pulse batteries provide everything you could picture at a cost never seen. Adding to the addicting power of Pulse Ultra batteries is the 5C charge rate, enabling you to recharge in rapid succession, leaving previous 1C LiPo batteries back at the charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every way possible, delivering mind numbing power levels that will take your flight to an entirely brand-new level of extreme. If you're searching for power, you simply discovered it. Pulse delivers extreme power for extreme pilots, when it pertains to value, Pulse just can't be beat.
Feel the pulse, and get hold of a new Pulse Ultra Battery for your 3D demands!



Specs:
Voltage: 11.1V
Cell Count: THREE
Capacity: 860mAh
Discharge Rate: 35C
Charge Rate:
Dimensions: 58mm x 31mm x 24.5mm (LxWxH)
Weight:
Balance Tap: JST-XH

Product Note:
Pulse batteries do not featured power leads, and will require completion user to solder their own style of battery adapter for the battery to be effectively used. Pulse batteries have bare leads covered with heat diminish protection, and are ready for the adapter of choice to be soldered to the positive/negative leads.