Castle Creations Castle Creations Talon 25 Brushless ESC

This is the Castle Creations Talon 25 Brushless ESC. This compact controller can keep it?s cool even throughout the most extreme 3D maneuvers. Talon 25 is intended for usage in a lot of 400-size helicopter setups running up to 6S LiPo or your favorite 3D foamie that brings up to 25 amps. Regardless of it's size, it boasts an impressive 8 amp peak/3 amp constant BEC, keeping even the most draining pipes servos at ease. Talon 25 likewise provides Castle?s industry-leading helicopter functions, not to point out simple shows utilizing the Castle Link USB adapter (coupon free of charge Castle Link consisted of). Talon 25 suggestions the scales at a mere 18 grams!

Talon 25 Specs:

Input voltage:

MIN: TWO LiPo
MAX: 6S LiPo

Max constant amperage at full throttle: 25 amps*
BEC voltage (voltage regulator for powering radio and servos): 5.5 volts
BEC output:

8 amp peak**
3 amp constant (always check servo draw prior to very first flight)

Dimensions:

Width: .72" (18.2mm)
Length: 1.72" (43.7mm)
Depth: 0.32" (8.1mm)
Weight (with wires): 0.63 oz. (17.9g)
Weight (without wires): 0.28 oz (7.9g)

Items required for operation or installation: Battery and motor connectors (offered individually)
Programmability: Totally programmable Castle feature set utilizing Castle Link USB adapter (coupon free of charge Castle Link adapter consisted of in package) and freely downloadable Castle Link Windows software application.
*RC PASTIME APPLICATION RATING: 25 amps throughout of a single 4,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature level should never surpass 100C (212F). Surpassing present or temperature level scores may damage elements and may shorten the life of the ESC. Constantly verify system present draw at full-throttle. Reduction load or boost airflow to reduce the ESC?s running temperature level.

**Peak indicates amperage sustainable for a lot of servos? present draw transients. Constantly validate servo present draw before the very first flight of the design.

Regularly gotten with the product that you are currently reading about.

LIPO 860mAh 11.1V 35C

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a brand-new level of power to the RC scene, based upon cutting edge lithium polymer innovation, and taking advantage of all the technological gains within this remarkable market. Pulse is about power & efficiency at a cost that can be managed. Not does premium power come at a premium price – Pulse provides it all in one pulse quickening punch.

Delivering intense power for your RC applications, Pulse batteries deliver everything you could picture at a cost never seen. Adding to the addictive power of Pulse Ultra batteries is the 5C charge rate, allowing you to charge in quick succession, leaving previous 1C LiPo batteries back at the battery charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every method possible, providing mind numbing power levels that will take your flight to a completely new level of extreme. If you're trying to find power, you just found it. Pulse provides intense power for intense pilots, and when it concerns value, Pulse merely can't be beat.
Feel the pulse, and get hold of a brand-new Pulse Ultra Battery for your 3D needs!



Specs:
Voltage: 11.1V
Cell Count: THREE
Capability: 860mAh
Discharge Rate: 35C
Charge Rate:
Dimensions: 58mm x 31mm x 24.5mm (LxWxH)
Weight:
Balance Tap: JST-XH

Item Note:
Pulse batteries do not featured power leads, and will require completion user to solder their own design of battery port for the battery to be effectively used. Pulse batteries have bare leads covered with heat diminish protection, and are ready for the port of option to be soldered to the positive/negative leads.