JavaScript seems to be disabled in your browser.
You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.
Zoom
Be the first to review this product. (Write Review)
Shipping: In Stock For ShippingStore Pickup: Check Availability
This item will earn you 24 reward point(s).24 points = $0.48 off your next order. Learn More
CC CapPack works in all brushless motor applications, where it serves to give just that little increase needed to overcome ripples in the battery voltage triggered by hard acceleration or long battery wires. Ripple voltage is hard on an ESC - including the CC CapPack can help reduce the load on the controller's on-board capacitors. This CapPack utilizes four 560μF, 35V capacitors totaling 2240μF, which increases its ripple lowering capabilities.It can be used with LiPo batteries approximately 8 cells. If your batteries are greater than 8s (35V) then you will require the 880μF, 50V CapPack.Helis:CC CapPack is extremely advised for all 500 class and smaller sized heli applications where Y harnesses and long wires can bleed voltage, and hard collective pulls can strain even the most powerful batteries.Surface Automobiles:With their high torque requirements - going from 0 to 100% throttle isn't simple on controllers or batteries - RC cars and trucks put massive loads on brushless power systems. Usage CC CapPacks in high efficiency applications (IE drag racing and high speed runs) to assist your system power through the abuse.Fixed Wing Airplane:Larger electrical power systems cause bigger electrical powered aircraft, and in some cases the range between the battery pack and the ESC grows beyond the length of the wires set up on the components. Including wire also includes inductance, which can increase the ripple voltage in a system. CC CapPack essentially negates the ripple triggered by the addition of approximately 12 inches of length to the battery wires.Note: All Castle controllers with information logging capabilities can report the ripple voltage they encounter throughout usage. Ripple voltage peaks ought to always be less than 10% of the overall pack voltage; the smaller sized the ripple voltage the better. If an application exhibits more than 10% ripple voltage under peak loads, the user ought to consider using higher discharge (C Score) batteries, much shorter wires, higher current connectors, better gearing or a smaller load.Multiple CapPacks may be used in an application. They ought to all be set up as close to the ESC as possible.
Specifications:
Product Produced: 06/23/2020
HRARACM133HFA01
