Castle Creations Cc Blower Sct/Sv3 Fan

This is the Cooling Fan for the Castle Creations Sidewinder 3,
or Sidewinder SCT Electronic Speed Controls.

**Will not work on older style cases utilized on the**
**non-waterproof Sidewinder SCT and initial Sidewinder 3.**

FFEATURES:
Snaps onto ESC, no screws required

INCLUDES:
Fan with Wire Lead and Connector
Fan Shroud

SPECS:
Input Voltage: 4.8 - 7.4V
Maximum RPM: 14,000
Wire Length: 11.4" (290mm)
Water resistant: NO, eliminate before exposing ESC to moisture

Regularly acquired with the thing that you are currently reviewing.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Advised for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for usage in heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB shows capability via Castle Link USB adapter (not consisted of,
    order CSEM6300)
Water resistant for usage in almost every environment (not intended for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes numerous stock brushed motors
4 magnet, four pole rotor for higher torque
1.4" diameter slotted stator
Detachable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector,
    On/Off Switch, Instructions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery adapter of modeler's choice

SPECS:
ESC;
Input Voltage: 2S LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery adapter
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Connector: 4mm gold
Wire Length: 9.5" (241mm)

The listed below thing also pairs truly well with the thing being discussed.

Cc Blower 15 Series For 1/8 Motors

This is the Motor Cooling Blower Fan and Shroud from Castle Creations.

FEATURES:
Fits motors with outside diameter between 1-1/2 and 1-7/8"
    (38 - 47mm) such as the Castle Creations Neu-Castle 2200 and 2650
Plugs into receiver and drops motor temperature level as much as 30°
One year restricted guarantee through producer beginning at date of
    purchase

INCLUDES:
Fan with wire and adapter, shroud and two zip ties

NEEDS:
Connecting to motor can and plugging into receiver

SPECS:
Length: 49mm
Width: 44.5mm
Height: 44.5mm
Wire Length: (9.5")

Lots of others have acquired this thing in addition to the thing that you are currently reviewing.

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Only (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity security makes it difficult to link in reverse
Textured surface area for easy gripping
Compatible with high-current 12-gauge wire
Protect, positive locking spring packed terminals for constant
    contact
Numerous locking barbs keep terminals secure

INCLUDES:
One black female plastic adapter
One black male plastic adapter
Two sets of gold metal pins
Direction sheet

NEEDS:
Soldering wires to the metal pins