Blade Torque Tube (2): 180 CFX

Regularly gotten with the thing that you are currently checking out.

Main Gear: 180 CFX




Want another excellent thing to compliment the above stated thing?

Gear Set: H2060




Want another excellent thing to compliment the above stated thing?




Introduction


Weighing simply 4 grams, the SH2060 is capable of producing as much as 11.4 oz-in of torque with transit times as low as .07 sec. This powerful combination of power and speed makes it an outstanding option for ultra micro CP helis developed for 3D aerobatics.







Specs


Size Classification: Minis and Micros
Type: Digital
Application: Cyclic Servo: Helicopter
Torque: 9 oz-in @4.8V, 11.4 oz-in @6V
Speed: 0.08 sec/60 deg @ 4.8V; .07 sec/60 deg @ 6V, at no load
Length: 0.77 in (19.6mm)
Width: 0.32 in (8.15mm)
Height: 0.98 in (25mm)
Weight: 0.14 oz (4g)
Bushing Or Bearing: Bushing
Connector Type: JST-ZHR port
Gear Type: Nylon
Gear Material: Nylon
Current Draw Idle: 2mA @ 4.8V; 0.18mA @ 6.0V
Current Draw Stall: 2.4mA @ 4.8V; 2.21mA @ 6.0V









This thing praises the main item right here.






This is a fantastic addition to the thing currently being gone over.

Rotor Head Linkage Set: 180 CFX




Regularly gotten with the thing that you are currently checking out.




Features



Optimized servo geometry for flawless controlAS3X® technology with piro-compensationReliable Castle Creations Talon 15 ESCRigid carbon fiber side frames provide a strong structureIntegrated bearing block servo mountsDigital high-speed Spektrum™ nanolite rotary servos for long-lasting precisionSpektrum™ DSMX® AR6335 nanolite receiver with AS3X flybarless technologyPowerful, 5800Kv brushless outrunner motorHigh-output 450mAh THREE 11.1V 30C Li-Po flight battery (included)Efficient torque-tube drive tail with ball-bearing supportAluminum tail boom and one-piece tail case designRequires a 6+ channel transmitter with Spektrum DSM2®/DSMX® technology and a suitable Li-Po battery charger - both sold individually




Introduction


From the masters of micro-heli development is a 3D device that breaks all the rules of performance. That’s due to the fact that the Blade® 180 CFX loads everything you’d anticipate from a 700-size, pro-class electrical heli into a ballistic device you can 3D just about anywhere. Digital, rotary servos are installed inside carbon fiber frames with optimized servo geometry. Our Spektrum™ AS3X® flybarless system now includes piro-compensation to provide control that’s kinetic in every orientation. Due to the fact that performance is nothing without power, a high-speed outrunner, Castle ESC and 3S Li-Po battery provide amazing authority to both the flybarless head and torque-tube driven tail rotor.

Never has a micro-class heli been made so capable. Never prior to has it been this simple to get a high-performance 3D heli.

Optimized Servo Geometry
Optimized servo geometry essentially eliminates mechanical inadequacy by keeping swashplate links near vertical throughout their variety of motion. The outcome is a flawless cyclic and collective response that feels nearly telekinetic.

AS3X® Innovation with Piro-Compensation
The Blade® 180 CFX heli utilizes Horizon Pastime’s ingenious AS3X® flybarless technology that now includes sophisticated piro-compensation for unequaled performance in a helicopter of this size.

Castle Creations ESC
The reliability of a Castle Creations Talon 15 speed control ensures great performance for even hard-core 3D flying plus pilots will enjoy the convenience of having motor timing and ideal governor settings pre-programmed.

Stiff Carbon Fiber Frame
The carbon fiber side frames sandwich aluminum bearing and installing bocks for a structure that is as resilient as it is important to accuracy control.

Nanolite Receiver
The Spektrum™ AR6335 6-channel receiver functions AS3X flybarless technology built-in to provide high-speed stability and accuracy that’s compatible with your preferred programmable aircraft transmitter with Spektrum DSMX® technology.

Nanolite Rotary Servos
The all-new Spektrum rotary servos feature standard rotary motion and digital accuracy with a response speed to meet the demanding workload of flybarless mechanics.

Brushless Outrunner Motor
The high-torque outrunner motor set up offers pro-level power and a 5800Kv output for aerobatic performance that doesn’t drag.

THREE Li-Po Power
The included high-output E-flite® 450mAh THREE 11.1V 30C Li-Po battery offers the performance hard-core 3D pilots need.

Torque-Tube Drive Tail
The torque-tube drive tail system includes ball-bearing support inside an aluminum boom that links at the tail rotor to a strong one-piece tail case.

Video Introduction






Tech Notes


You will require...
6+ channel DSM2® or DSMX® compatible transmitter
Charger for the flight battery






Specs


Main Rotor Size: 14.17 in (360mm)
Tail Rotor Size: 3.56 in (90.5mm)
Gross Weight: 6.70 oz (190 g)
Length: 13.39 in (340mm)
Motor Size: Brushless Out-Runner, 5800Kv
Kit/ARF/RTF: BNF Basic
Rotor Blade Length: Main: 6.06 in (154mm) Tail: 1.26 in (32mm)
Experience Level: Advanced
Recommended Environment: Indoor/Outdoor
Is Assembly Required: No





Media Gallery





 View Image Gallery