Axial SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Key Functions:
• Consists of radio system, ESC and transmitter batteries
• Consists of motor and on-board LiPo battery
• Realistic narrow-stance rock spider body in olive green or red
• Molded roll cage with realistic light bar
• Realistic chauffeur figure and lots of other scale information
• Formally licensed KMC XD229 Machete Crawl wheels
• Formally licensed Nitto Trail Grappler M/T tires (S30 substance, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts permit optimal suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones supply strength and durability
• Rugged steel C-channel frame rails with bracing keep everything rigid and lined up
• Front and rear axles include a two-piece, molded plastic strong axle style
• 3-Link front and 4-link rear suspension supply optimal handling
• Coil-over shocks with simulated tank and resilient plastic suspension links deliver tested Axial crawling performance
• Front and rear differentials each home a worm gear setup to power the axles and produce greater ground clearance. Worm gear drive likewise offers a low gear ratio to minimize torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the ideal rig to bring on your hiking, camping, and other outside and indoor adventures — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even new modelers driving the SCX24 chassis will be well-equipped to take on tough climbs up and rough trails. Like the larger SCX10™ chassis, this smaller sized variation utilizes plenty of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pressing onward and upward.

For the most trustworthy handling, the SCX24 chassis features a three-link front and four-link rear suspension. The mix of coil-over shocks and resilient plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that lowers torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charm on the trails. Check out that Deadbolt body — with its narrow position, bulging hood, realistic chauffeur figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you’ll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.

Adding even more to its novice appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action remains in the box: put together and finished vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electric motor and 350mAh TWO 7.4V LiPo battery; USB LiPo battery charger; and even 4 AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (set up)
    (1) Dynamite® 88T brushed electric motor (set up)
    (1) Axial AS-1 guiding servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh TWO 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Item Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis functions rugged and strong steel c-channel frame rails with bracing to keep everything intact and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor offers the correct amount of torque to assist ascend high climbs up. It's mated to a steel motor install to keep flex to a minimum, which helps protect the equipments.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm gear setup to get the power to the axles and produce greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles in addition to steel dogbones supply strength and durability to keep things running during tough climbs up and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to permit optimal suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the mix of coilover shocks with simulated reservoirs and resilient plastic suspension links delivers the crawling performance you've understood and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a 2 piece, molded plastic strong axle style. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two bright LED lights are included and are installed in the front bumper. An extra LED light port on the ESC allows you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link style for the rear which is enhanced to minimize axle steer and torque twist. We've likewise included additional suspension links for adjusting your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally licensed KMC XD Machete wheels are famous in the off-road world. They are molded in black and feature spectacular scale information, despite the small scale.
The officially accredited Nitto Trail Grappler M/T Tires use a fantastic blend of off-road performance while still keeping exceptional composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system offers easy access to on-board parts. You can rapidly reach the battery and chassis by getting rid of simply two body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller sized in size does not imply the functions need to do the same. No bushings discovered here, rather the drivetrain is freely spinning on sealed cartridge bearings throughout the whole vehicle.
 

AXIAL AS-1 SERVO
Installed simply above the front axle is the Axial AS-1 servo, with a servo saver that permits guiding precision, while likewise supplying protection for the servo equipments in the event of a bind or effect.
 

Specifications

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (included)
Charger: USB LiPo battery charger (included)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No