Axial SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

Secret Functions:
• Consists of radio system, ESC and transmitter batteries
• Consists of motor and on-board LiPo battery
• Realistic narrow-stance rock spider body in olive green or red
• Molded roll cage with reasonable light bar
• Realistic motorist figure and lots of other scale details
• Formally licensed KMC XD229 Machete Crawl wheels
• Formally licensed Nitto Trail Grappler M/T tires (S30 compound, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and sturdiness
• Rugged steel C-channel frame rails with bracing keep everything stiff and aligned
• Front and rear axles consist of a two-piece, molded plastic solid axle design
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated reservoir and long lasting plastic suspension links deliver tested Axial crawling performance
• Front and rear differentials each home a worm gear setup to power the axles and create greater ground clearance. Worm gear drive likewise provides a low gear ratio to lower torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the perfect rig to bring on your hiking, outdoor camping, and other outside and indoor experiences — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even new modelers driving the SCX24 chassis will be fully equipped to take on tough climbs up and rough routes. Like the larger SCX10™ chassis, this smaller sized variation utilizes a lot of steel elements — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pressing onward and upward.

For the most reputable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The mix of coil-over shocks and long lasting plastic suspension links delivers Axial-worthy crawling performance even at this little scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that minimizes torque twist.

Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt flaunts competence and charm on the routes. Have a look at that Deadbolt body — with its narrow stance, bulging hood, reasonable motorist figure, and molded roll cage with reasonable light bar. The realism continues right down to the ground, where you’ll find licensed KMC XD229 Machete Crawl wheels covered in Nitto Trail Grappler tires.

Adding even more to its newbie appeal, the SCX24 Deadbolt comes 100% total and ready to run. Whatever required for action remains in package: assembled and completed lorry; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh TWO 7.4V LiPo battery; USB LiPo charger; and even 4 AA cells for the transmitter!

What's in package?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (installed)
    (1) Dynamite® 88T brushed electric motor (installed)
    (1) Axial AS-1 guiding servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh TWO 7.4V LiPo battery
(1) USB LiPo charger
(1) Item Handbook




STEEL C-CHANNEL CHASSIS FRAME RAILS
Much like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything undamaged and aligned.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the right amount of torque to assist ascend steep climbs up. It's mated to a steel motor install to keep flex to a minimum, which helps protect the gears.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm gear setup to get the power to the axles and create greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and sturdiness to keep things running during tough climbs up and rough routes.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the mix of coilover shocks with simulated reservoirs and long lasting plastic suspension links delivers the crawling performance you've understood and get out of Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, molded plastic solid axle design. For optimum handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 intense LED lights are included and are installed in the front bumper. An additional LED light port on the ESC allows you to add optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry makes use of a 4-Link design for the rear which is enhanced to lower axle steer and torque twist. We've likewise included additional suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale details, in spite of the little scale.
The officially certified Nitto Trail Grappler M/T Tires use a great mix of off-road performance while still maintaining exceptional composure for on-road usage.
 

HINGED BODY SYSTEM
The hinged body system provides simple access to on-board elements. You can rapidly reach the battery and chassis by removing simply 2 body clips and swinging the body up.
 


FULL BALL BEARINGS
Even if the SCX24™ is smaller sized in size doesn't mean the features need to follow suit. No bushings found here, rather the drivetrain is easily spinning on sealed cartridge bearings throughout the entire lorry.
 

AXIAL AS-1 SERVO
Installed simply above the front axle is the Axial AS-1 servo, with a servo saver that allows for guiding precision, while likewise offering security for the servo gears in case of a bind or effect.
 

Requirements

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (included)
Charger: USB LiPo charger (included)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No