Axial SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

Key Functions:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Practical narrow-stance rock crawler body in olive green or red
• Molded roll cage with realistic light bar
• Practical chauffeur figure and numerous other scale details
• Formally certified KMC XD229 Machete Crawl wheels
• Formally certified Nitto Trail Grappler M/T tires (S30 substance, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts enable maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and sturdiness
• Rugged steel C-channel frame rails with bracing keep whatever stiff and lined up
• Front and rear axles include a two-piece, molded plastic solid axle style
• 3-Link front and 4-link rear suspension supply optimal handling
• Coil-over shocks with simulated reservoir and long lasting plastic suspension links provide tested Axial crawling efficiency
• Front and rear differentials each home a worm equipment setup to power the axles and produce higher ground clearance. Worm equipment drive also offers a low equipment ratio to reduce torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the perfect rig to take along on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even brand-new modelers driving the SCX24 chassis will be fully equipped to tackle hard climbs and rough tracks. Like the bigger SCX10™ chassis, this smaller variation uses plenty of steel parts — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pressing onward and upward.

For the most trusted handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and long lasting plastic suspension links provides Axial-worthy crawling efficiency even at this little scale. The worm equipment drive setup allows a high ground clearance plus a low equipment ratio that lowers torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt flaunts competence and charm on the tracks. Have a look at that Deadbolt body — with its narrow stance, bulging hood, realistic chauffeur figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you’ll discover certified KMC XD229 Machete Crawl wheels covered in Nitto Trail Grappler tires.

Adding a lot more to its newbie appeal, the SCX24 Deadbolt comes 100% total and all set to run. Whatever required for action is in package: put together and completed automobile; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo battery charger; and even four AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (set up)
    (1) Dynamite® 88T brushed electric motor (set up)
    (1) Axial AS-1 guiding servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Item Handbook




STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and durable steel c-channel frame rails with bracing to keep whatever undamaged and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor offers the right amount of torque to assist rise high climbs. It's mated to a steel motor install to keep flex to a minimum, which helps safeguard the gears.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm equipment setup to get the power to the axles and produce higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles in addition to steel dogbones provide strength and sturdiness to keep things running throughout hard climbs and rough tracks.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to enable maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the combination of coilover shocks with simulated reservoirs and long lasting plastic suspension links provides the crawling efficiency you've understood and get out of Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a two piece, molded plastic solid axle style. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two brilliant LED lights are included and are mounted in the front bumper. An additional LED light port on the ESC permits you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry uses a 4-Link style for the rear which is optimized to reduce axle guide and torque twist. We've also included additional suspension links for adjusting your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally certified KMC XD Machete wheels are famous in the off-road world. They are molded in black and feature sensational scale details, despite the little scale.
The formally accredited Nitto Trail Grappler M/T Tires use a fantastic blend of off-road efficiency while still keeping excellent composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system provides simple access to on-board parts. You can rapidly reach the battery and chassis by eliminating simply two body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller in size does not indicate the features require to do the same. No bushings found here, rather the drivetrain is freely spinning on sealed cartridge bearings throughout the whole automobile.
 

AXIAL AS-1 SERVO
Installed simply above the front axle is the Axial AS-1 servo, with a servo saver that enables guiding accuracy, while also providing defense for the servo gears in case of a bind or effect.
 

Requirements

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (included)
Charger: USB LiPo battery charger (included)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) diameter
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Full body
Is Assembly Required: No