Axial SCX10 II Trail Honcho 1/10th Electric 4WD RTR

**Extra Technical Details Will Be Added When It Appears,**
This is the Electric Powered, Radio Controlled, 1/10 scale
Prepared to Run SCX10 II Trail Honcho 4WD.

FUNCTIONS:
Chassis: Scale steel C-channel side rails with adjustable body install,
    adjustable bumper mounts with swaybar mounting points, mounting
    points for optional 2-speed and servo winch, adjustable chassis
    installed servo system
Drive: Full time 4WD locked drivetrain with WB8 HD Swine
    driveshafts, UVJ style front driveshafts for up to 45° of guiding
    angle, complete ball bearing drivetrain
Transmission: AX10 three gear layout, metal motor plate, adjustable
    ratio for high speed or competitors level crawling speed
Slipper Clutch: Double pad style for added area, 32P gear
    pitch for high-torque applications
Motor: 35 turn, brush geared up, water resistant, integrated cooling
    fan
Radio: Technique TTX200 2-channel SLT radio with TR325 Receiver,
    guiding and throttle end point adjustment & reverse, pushbutton
    guiding and throttle trim
Steering Servo: Technique TSX45 metal gear, water resistant, 151oz/in
    (10.87kg/cm) torque ranking, dual ball bearings
ESC: AE-5L waterproof, switchable in between LiPo or NiMH
    operation with a basic jumper, Star plug battery port,
    built-in LED light controller (NOTE LED leads are not compatible
    with old Axial LED light strings, or third party LED light strings)
Stimulate Equipment: 56T 32-pitch, plastic building and construction
Pinion Equipment 15T 32-pitch, steel building and construction
LED Lights: 4 white for head lights and turn signal markers, and
    2 traffic signals for tail lights
Battery Tray: Easy gain access to front install, accomodates batteries as much as
    5.75 x 1.2" (147 x 32mm) THREE, 5000mAh, with battery posts in
    position measurements are lowered to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Hardened steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal gears, enhanced gear
    ratio for lowered torque twist, optional tailoring choices, one-
    piece axle real estate, increased clearance, bigger load rated
    bearings for resilience, 8° kingpin axle removes tire scrub,
    single piece axle real estate, one-piece all metal locker, 10°
    increment modifications for knuckle carriers and straight axle
    adapters, enhanced gear ratio; 3.75 compared with 2.92 formerly,
    for less torque twist
Body: Painted Trail Honcho
Front Bumper: Scale tube style with aluminum skid plates
Wheels: 1.9" Approach Hole, 1.02" (26mm) broad, 2.12" (53.9mm) tall,
    12mm hex, matte black finish
Tires: 1.9" Falken Wildpeak M/T, strongly treaded Mud Terrain
    tread with amazing traction on lots of surface areas, 4.7" (119.4mm) tall,
    1.5" (38.1mm) broad
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Optimized suspension geometry with integrated mounts
    upper and lower links, 4-link style decreases axle steer
    and torque twist, and defend against suspension wrap-up in high-
    power applications, composite links
Steering: Appropriate CMS geometry utilizing 3-link setup with panhard bar,
    45° guiding angle
Service warranty: One year bumper to bumper restricted. Axial's service warranty center
    Pastime Providers will repair or change any incorrectly made part.
    Evidence of purchase is required for Axial to honor any service warranty
    claim. Axial reserves the right to alter or modify this service warranty
    without notification. This service warranty does not cover damages due to typical
    wear and tear, users' failure to carry out regular upkeep, user
    mistake of assembly or setup, modifications, misuse, crash
    damage, or the addition of aftermarket parts or optional parts.
    Note: Buying products from unauthorized sellers may void the
    service warranty and prevent support and service.
    Repair work or replacement of the product by Pastime Providers is the sole
    and exclusive solution for any loss or damages.

INCLUDES:
RTR SCX10 II Trail Honcho with Oil-Filled Shocks, Wheels, Tires,
    Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
    Receiver Box, LED Lights 4 AA Batteries and User's Manual

NEEDS:
Battery: 6-cell NiMH or 2-3S LiPo
Battery Battery Charger: Compatible with selected battery
Building and track devices

SPECIFICATIONS:
Car-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
    12.0" (305mm) with optional link kits sold individually
Ground Clearance: 3.0" (77mm)
Weight: 4.5lbs (2.04kg) approximately, with electronic devices
Optimized Equipment Ratio: 3.75:1
Last Drive Ratio (FDR): 40.44, stock
    (33.69-54.15 with different spur/pinion gear combinations, extra
spur and pinion gears should be purchased individually)
    Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Qty. Stock Number
2 7x14mm Ring Equipment 1 AXIC4406
2 5x14mm Pinion gear 1 AXIC4407
2 5x11mm Pinion Equipment 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Back Axles 1 DTXC1547
2 5x11mm 2-sp Leading Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535