Axial SCX10 II Trail Honcho 1/10th Electric 4WD RTR

**Additional Technical Information Will Be Added When It Becomes Available,**
This is the Electric Powered, Radio Controlled, 1/10 scale
Ready to Run SCX10 II Trail Honcho 4WD.

FEATURES:
Chassis: Scale steel C-channel side rails with adjustable body mount,
    adjustable bumper installs with swaybar mounting points, mounting
    points for optional 2-speed and servo winch, adjustable chassis
    mounted servo system
Drive: Full-time 4WD locked drivetrain with WB8 HD Swine
    driveshafts, UVJ style front driveshafts for up to 45° of guiding
    angle, complete ball bearing drivetrain
Transmission: AX10 3 equipment layout, metal motor plate, adjustable
    ratio for high speed or competitors level crawling speed
Slipper Clutch: Dual pad design for added surface area, 32P equipment
    pitch for high-torque applications
Motor: 35 turn, brush equipped, water resistant, integrated cooling
    fan
Radio: Strategy TTX200 2-channel SLT radio with TR325 Receiver,
    guiding and throttle end point adjustment & reverse, pushbutton
    guiding and throttle trim
Steering Servo: Strategy TSX45 metal equipment, water resistant, 151oz/in
    (10.87kg/cm) torque ranking, double ball bearings
ESC: AE-5L waterproof, switchable in between LiPo or NiMH
    operation with a basic jumper, Star plug battery connector,
    integrated LED light controller (NOTE LED leads are not suitable
    with old Axial LED light strings, or 3rd party LED light strings)
Stimulate Gear: 56T 32-pitch, plastic building
Pinion Gear 15T 32-pitch, steel building
LED Lights: 4 white for head lights and turn signal markers, and
    two red lights for tail lights
Battery Tray: Easy gain access to front mount, accomodates batteries as much as
    5.75 x 1.2" (147 x 32mm) THREE, 5000mAh, with battery posts in
    position measurements are decreased to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Hardened steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal equipments, optimized equipment
    ratio for decreased torque twist, optional tailoring options, one-
    piece axle real estate, increased clearance, larger load ranked
    bearings for toughness, 8° kingpin axle gets rid of tire scrub,
    single piece axle real estate, one-piece all metal locker, 10°
    increment changes for knuckle providers and straight axle
    adapters, optimized equipment ratio; 3.75 compared to 2.92 previously,
    for less torque twist
Body: Painted Trail Honcho
Front Bumper: Scale tube design with aluminum skid plates
Wheels: 1.9" Method Hole, 1.02" (26mm) large, 2.12" (53.9mm) tall,
    12mm hex, matte black surface
Tires: 1.9" Falken Wildpeak M/T, strongly treaded Mud Surface
    tread with incredible traction on numerous surfaces, 4.7" (119.4mm) tall,
    1.5" (38.1mm) large
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Optimized suspension geometry with integrated installs
    upper and lower links, 4-link design decreases axle steer
    and torque twist, and guards against suspension wrap-up in high-
    power applications, composite links
Steering: Correct CMS geometry using 3-link setup with panhard bar,
    45° guiding angle
Guarantee: One year bumper to bumper limited. Axial's service warranty center
    Hobby Providers will repair or replace any incorrectly made part.
    Evidence of purchase is required for Axial to honor any service warranty
    claim. Axial reserves the right to change or modify this service warranty
    without notification. This service warranty does not cover damages due to typical
    wear and tear, users' failure to carry out regular upkeep, user
    error of assembly or setup, adjustments, abuse, crash
    damage, or the addition of aftermarket parts or optional parts.
    Keep in mind: Getting products from unapproved sellers might void the
    service warranty and avoid support and service.
    Repair or replacement of the item by Hobby Providers is the sole
    and unique solution for any loss or damages.

INCLUDES:
RTR SCX10 II Trail Honcho with Oil-Filled Shocks, Wheels, Tires,
    Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
    Receiver Box, LED Lights 4 AA Batteries and User's Manual

NEEDS:
Battery: 6-cell NiMH or 2-3S LiPo
Battery Battery Charger: Compatible with chosen battery
Structure and track equipment

SPECS:
Vehicle-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
    12.0" (305mm) with optional link sets sold separately
Ground Clearance: 3.0" (77mm)
Weight: 4.5pounds (2.04kg) around, with electronics
Optimized Gear Ratio: 3.75:1
Final Drive Ratio (FDR): 40.44, stock
    (33.69-54.15 with different spur/pinion equipment mixes, extra
spur and pinion equipments need to be bought separately)
    Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Qty. Stock Number
2 7x14mm Ring Gear 1 AXIC4406
2 5x14mm Pinion equipment 1 AXIC4407
2 5x11mm Pinion Gear 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Back Axles 1 DTXC1547
2 5x11mm 2-sp Leading Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535