Axial SCX10 II Trail Honcho 1/10th Electric 4WD RTR

**Additional Technical Details Will Be Included When It Appears,**
This is the Electric Powered, Radio Controlled, 1/10 scale
Prepared to Run SCX10 II Trail Honcho 4WD.

FUNCTIONS:
Chassis: Scale steel C-channel side rails with adjustable body install,
    adjustable bumper installs with swaybar mounting points, mounting
    points for optional 2-speed and servo winch, adjustable chassis
    installed servo system
Drive: Full time 4WD locked drivetrain with WB8 HD Swine
    driveshafts, UVJ design front driveshafts for up to 45° of guiding
    angle, full ball bearing drivetrain
Transmission: AX10 three equipment layout, metal motor plate, adjustable
    ratio for high speed or competitors level crawling speed
Slipper Clutch: Dual pad style for added area, 32P equipment
    pitch for high-torque applications
Motor: 35 turn, brush equipped, water resistant, integrated cooling
    fan
Radio: Method TTX200 2-channel SLT radio with TR325 Receiver,
    guiding and throttle end point adjustment & reverse, pushbutton
    guiding and throttle trim
Steering Servo: Method TSX45 metal equipment, water resistant, 151oz/in
    (10.87kg/cm) torque ranking, double ball bearings
ESC: AE-5L water resistant, switchable in between LiPo or NiMH
    operation with a simple jumper, Star plug battery port,
    integrated LED light controller (NOTE LED leads are not compatible
    with old Axial LED light strings, or third party LED light strings)
Stimulate Equipment: 56T 32-pitch, plastic construction
Pinion Equipment 15T 32-pitch, steel construction
LED Lights: 4 white for head lights and turn signal markers, and
    2 traffic signals for tail lights
Battery Tray: Easy gain access to front install, accomodates batteries approximately
    5.75 x 1.2" (147 x 32mm) THREE, 5000mAh, with battery posts in
    position measurements are lowered to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Hardened steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal equipments, optimized equipment
    ratio for lowered torque twist, optional gearing choices, one-
    piece axle real estate, increased clearance, bigger load rated
    bearings for resilience, 8° kingpin axle eliminates tire scrub,
    single piece axle real estate, one-piece all metal locker, 10°
    increment adjustments for knuckle carriers and straight axle
    adapters, optimized equipment ratio; 3.75 compared with 2.92 previously,
    for less torque twist
Body: Painted Trail Honcho
Front Bumper: Scale tube style with aluminum skid plates
Wheels: 1.9" Technique Hole, 1.02" (26mm) wide, 2.12" (53.9mm) high,
    12mm hex, matte black finish
Tires: 1.9" Falken Wildpeak M/T, strongly treaded Mud Surface
    tread with amazing traction on numerous surface areas, 4.7" (119.4mm) high,
    1.5" (38.1mm) wide
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Optimized suspension geometry with integrated installs
    upper and lower links, 4-link style minimizes axle steer
    and torque twist, and guards against suspension wrap-up in high-
    power applications, composite links
Steering: Appropriate CMS geometry using 3-link setup with panhard bar,
    45° guiding angle
Guarantee: One year bumper to bumper minimal. Axial's service warranty center
    Pastime Services will repair or change any improperly made part.
    Proof of purchase is needed for Axial to honor any service warranty
    claim. Axial reserves the right to change or modify this service warranty
    without notice. This service warranty does not cover damages due to typical
    wear and tear, users' failure to perform regular upkeep, user
    mistake of assembly or installation, modifications, abuse, crash
    damage, or the addition of aftermarket parts or optional parts.
    Keep in mind: Getting items from unapproved sellers may void the
    service warranty and avoid assistance and service.
    Repair or replacement of the item by Pastime Services is the sole
    and exclusive solution for any loss or damages.

INCLUDES:
RTR SCX10 II Trail Honcho with Oil-Filled Shocks, Wheels, Tires,
    Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
    Receiver Box, LED Lights 4 AA Batteries and User's Manual

NEEDS:
Battery: 6-cell NiMH or 2-3S LiPo
Battery Battery Charger: Suitable with selected battery
Building and track devices

SPECIFICATIONS:
Car-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
    12.0" (305mm) with optional link sets offered separately
Ground Clearance: 3.0" (77mm)
Weight: 4.5pounds (2.04kg) around, with electronic devices
Optimized Equipment Ratio: 3.75:1
Last Drive Ratio (FDR): 40.44, stock
    (33.69-54.15 with various spur/pinion equipment combinations, extra
spur and pinion equipments need to be purchased separately)
    Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Area Qty. Qty. Stock Number
2 7x14mm Ring Equipment 1 AXIC4406
2 5x14mm Pinion equipment 1 AXIC4407
2 5x11mm Pinion Equipment 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Back Axles 1 DTXC1547
2 5x11mm 2-sp Leading Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535