Axial SCX10 II Trail Honcho 1/10th Electric 4WD RTR

**Additional Technical Information Will Be Added When It Becomes Available,**
This is the Electric Powered, Radio Controlled, 1/10 scale
Prepared to Run SCX10 II Trail Honcho 4WD.

FUNCTIONS:
Chassis: Scale steel C-channel side rails with adjustable body mount,
    adjustable bumper installs with swaybar installing points, installing
    points for optional 2-speed and servo winch, adjustable chassis
    installed servo system
Drive: Full-time 4WD locked drivetrain with WB8 HD Wild Boar
    driveshafts, UVJ style front driveshafts for up to 45° of guiding
    angle, complete ball bearing drivetrain
Transmission: AX10 3 gear design, metal motor plate, adjustable
    ratio for high speed or competition level crawling speed
Slipper Clutch: Double pad style for included surface area, 32P gear
    pitch for high-torque applications
Motor: 35 turn, brush geared up, water resistant, integrated cooling
    fan
Radio: Strategy TTX200 2-channel SLT radio with TR325 Receiver,
    guiding and throttle end point adjustment & reverse, pushbutton
    guiding and throttle trim
Guiding Servo: Strategy TSX45 metal gear, water resistant, 151oz/in
    (10.87kg/cm) torque ranking, dual ball bearings
ESC: AE-5L waterproof, switchable between LiPo or NiMH
    operation with a simple jumper, Star plug battery connector,
    integrated LED light controller (KEEP IN MIND LED leads are not suitable
    with old Axial LED light strings, or third party LED light strings)
Spur Gear: 56T 32-pitch, plastic building
Pinion Gear 15T 32-pitch, steel building
LED Lights: Four white for head lights and turn signal markers, and
    2 traffic signals for tail lights
Battery Tray: Easy gain access to front mount, accomodates batteries as much as
    5.75 x 1.2" (147 x 32mm) 3S, 5000mAh, with battery posts in
    position measurements are lowered to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Solidified steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal equipments, enhanced gear
    ratio for lowered torque twist, optional tailoring options, one-
    piece axle housing, increased clearance, larger load rated
    bearings for durability, 8° kingpin axle eliminates tire scrub,
    single piece axle housing, one-piece all metal locker, 10°
    increment changes for knuckle providers and straight axle
    adapters, enhanced gear ratio; 3.75 compared with 2.92 formerly,
    for less torque twist
Body: Painted Trail Honcho
Front Bumper: Scale tube style with aluminum skid plates
Wheels: 1.9" Approach Hole, 1.02" (26mm) wide, 2.12" (53.9mm) high,
    12mm hex, matte black finish
Tires: 1.9" Falken Wildpeak M/T, aggressively treaded Mud Terrain
    tread with amazing traction on many surface areas, 4.7" (119.4mm) high,
    1.5" (38.1mm) wide
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Enhanced suspension geometry with integrated installs
    upper and lower links, 4-link style decreases axle guide
    and torque twist, and guards against suspension wrap-up in high-
    power applications, composite links
Steering: Appropriate CMS geometry using 3-link setup with panhard bar,
    45° guiding angle
Guarantee: One year bumper to bumper restricted. Axial's service warranty center
    Hobby Providers will repair or replace any incorrectly made part.
    Evidence of purchase is required for Axial to honor any service warranty
    claim. Axial reserves the right to change or customize this service warranty
    without notice. This service warranty does not cover damages due to regular
    wear and tear, users' failure to perform routine upkeep, user
    error of assembly or installation, modifications, misuse, crash
    damage, or the addition of aftermarket parts or optional parts.
    Note: Purchasing items from unapproved sellers might void the
    service warranty and avoid assistance and service.
    Repair or replacement of the product by Hobby Providers is the sole
    and unique solution for any loss or damages.

INCLUDES:
RTR SCX10 II Trail Honcho with Oil-Filled Shocks, Wheels, Tires,
    Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
    Receiver Box, LED Lights 4 AA Batteries and Instruction Manual

NEEDS:
Battery: 6-cell NiMH or 2-3S LiPo
Battery Charger: Suitable with selected battery
Building and track equipment

SPECS:
Automobile-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
    12.0" (305mm) with optional link packages offered independently
Ground Clearance: 3.0" (77mm)
Weight: 4.5lbs (2.04kg) roughly, with electronics
Enhanced Gear Ratio: 3.75:1
Last Drive Ratio (FDR): 40.44, stock
    (33.69-54.15 with various spur/pinion gear combinations, extra
spur and pinion equipments should be purchased independently)
    Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Location Qty. Qty. Stock Number
2 7x14mm Ring Gear 1 AXIC4406
2 5x14mm Pinion gear 1 AXIC4407
2 5x11mm Pinion Gear 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Rear Axles 1 DTXC1547
2 5x11mm 2-sp Leading Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535