Axial SCX10 II Trail Honcho 1/10th Electric 4WD RTR

**Additional Technical Info Will Be Included When It Becomes Available,**
This is the Electric Powered, Radio Controlled, 1/10 scale
Ready to Run SCX10 II Trail Honcho 4WD.

FUNCTIONS:
Chassis: Scale steel C-channel side rails with adjustable body install,
    adjustable bumper installs with swaybar installing points, installing
    points for optional 2-speed and servo winch, adjustable chassis
    installed servo system
Drive: Full-time 4WD locked drivetrain with WB8 HD Wild Boar
    driveshafts, UVJ design front driveshafts for up to 45° of steering
    angle, full ball bearing drivetrain
Transmission: AX10 three equipment layout, metal motor plate, adjustable
    ratio for high speed or competitors level crawling speed
Slipper Clutch: Dual pad design for added area, 32P equipment
    pitch for high-torque applications
Motor: 35 turn, brush geared up, water resistant, integrated cooling
    fan
Radio: Tactic TTX200 2-channel SLT radio with TR325 Receiver,
    steering and throttle end point adjustment & reverse, pushbutton
    steering and throttle trim
Guiding Servo: Tactic TSX45 metal equipment, water resistant, 151oz/in
    (10.87kg/cm) torque rating, dual ball bearings
ESC: AE-5L waterproof, switchable between LiPo or NiMH
    operation with an easy jumper, Star plug battery port,
    integrated LED light controller (KEEP IN MIND LED leads are not compatible
    with old Axial LED light strings, or 3rd party LED light strings)
Spur Gear: 56T 32-pitch, plastic building and construction
Pinion Gear 15T 32-pitch, steel building and construction
LED Lights: Four white for head lights and turn signal markers, and
    two red lights for tail lights
Battery Tray: Easy access front install, accomodates batteries as much as
    5.75 x 1.2" (147 x 32mm) 3S, 5000mAh, with battery posts in
    position measurements are reduced to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Solidified steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal equipments, optimized equipment
    ratio for reduced torque twist, optional gearing choices, one-
    piece axle housing, increased clearance, bigger load ranked
    bearings for resilience, 8° kingpin axle gets rid of tire scrub,
    single piece axle housing, one-piece all metal locker, 10°
    increment adjustments for knuckle providers and straight axle
    adapters, optimized equipment ratio; 3.75 compared with 2.92 previously,
    for less torque twist
Body: Painted Trail Honcho
Front Bumper: Scale tube design with aluminum skid plates
Wheels: 1.9" Method Hole, 1.02" (26mm) broad, 2.12" (53.9mm) tall,
    12mm hex, matte black surface
Tires: 1.9" Falken Wildpeak M/T, aggressively treaded Mud Surface
    tread with remarkable traction on lots of surfaces, 4.7" (119.4mm) tall,
    1.5" (38.1mm) broad
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Enhanced suspension geometry with incorporated installs
    upper and lower links, 4-link design reduces axle guide
    and torque twist, and guards against suspension wrap-up in high-
    power applications, composite links
Steering: Appropriate CMS geometry using 3-link setup with panhard bar,
    45° steering angle
Service warranty: One year bumper to bumper restricted. Axial's warranty center
    Pastime Solutions will fix or change any incorrectly made part.
    Proof of purchase is needed for Axial to honor any warranty
    claim. Axial reserves the right to change or modify this warranty
    without notification. This warranty does not cover damages due to typical
    wear and tear, users' failure to perform routine maintenance, user
    error of assembly or setup, modifications, misuse, crash
    damage, or the addition of aftermarket parts or optional parts.
    Note: Acquiring products from unapproved retailers may void the
    warranty and avoid support and service.
    Repair or replacement of the product by Pastime Solutions is the sole
    and exclusive remedy for any loss or damages.

INCLUDES:
RTR SCX10 II Trail Honcho with Oil-Filled Shocks, Wheels, Tires,
    Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
    Receiver Box, LED Lights 4 AA Batteries and User's Manual

REQUIRES:
Battery: 6-cell NiMH or 2-3S LiPo
Battery Battery Charger: Suitable with picked battery
Structure and track equipment

SPECS:
Automobile-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
    12.0" (305mm) with optional link packages sold independently
Ground Clearance: 3.0" (77mm)
Weight: 4.5lbs (2.04kg) around, with electronic devices
Enhanced Gear Ratio: 3.75:1
Final Drive Ratio (FDR): 40.44, stock
    (33.69-54.15 with various spur/pinion equipment combinations, additional
spur and pinion equipments must be bought independently)
    Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Location Qty. Qty. Stock Number
2 7x14mm Ring Gear 1 AXIC4406
2 5x14mm Pinion equipment 1 AXIC4407
2 5x11mm Pinion Gear 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Rear Axles 1 DTXC1547
2 5x11mm 2-sp Leading Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535