Axial Hex Socket Tap Flat Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Flat Head Screws.

FEATURES:
Black metal construction

CONSISTS OF:
10 M3 x 10mm screws

NEEDS:
Setup on car

COMMENTS:
Can be used where ever this size screw is needed

This product compliments the above gone over product.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic port body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male port (pins on both sides)
One male-female port (pins on one side)
Two pieces of small Red heat-shrinkable tubing
Two pieces of small Black heat-shrinkable tubing

NEEDS:
Solder, soldering iron (HCAR0775) or soldering weapon

SPECIFICATIONS:
Overall length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, 6 locations: .181" (4.6mm)
Width in between pins: .058" (1.4mm)

COMMENTS:
The port is NOT suitable with small White
    Futaba transmitter battery ports.

Get this product to enhance the one you read around.

Hardened Universal Shaft For Axial Ax10 Scorpion

Junfac Hardened Universal Shaft For Axial AX10 Scorpion

Here is another product that compliments the product being gone over.

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pushed fiber construction
Replaces worn slipper pads

CONSISTS OF:
Slipper Pad for the Axial Scorpion

NEEDS:
Setting up in slipper clutch assembly following guidelines in
    manual

This product compliments the main item right here.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Crawler AXIC9001.

FEATURES:
Black plastic construction

CONSISTS OF:
One 48DP 87T spur gear

NEEDS:
Setup on the Rock Crawler

This product compliments the above gone over product.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal construction, black in color

CONSISTS OF:
10 nylon locking hex nuts

NEEDS:
Setup on the Scorpion

SPECIFICATIONS:
Thickness: 4mm
External size: 6mm
Inner size: 2mm

This is a great addition to the product presently being gone over.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal construction

CONSISTS OF:
10 M3 x 10mm screws

NEEDS:
Setup on car

COMMENTS:
Can be used any place this size screw is needed

Here is a wonderful product that many others have bought at the exact same time.

Hex Socket Tap Flat Head M3x12mm Black (10)

These are the Axial M3x12mm Hex Socket Tapping Flat Head Screws.

FEATURES:
Black metal construction

CONSISTS OF:
10 M3 x 12mm screws

NEEDS:
Setup on car

COMMENTS:
Can be used where ever this size screw is needed

Get this product to enhance the one you read around.

Hex Socket Tap Flat Head M3x30mm Black (10)

These are the Axial M3x30mm Hex Socket Tapping Flat Head Screws.

FEATURES:
Black metal construction

CONSISTS OF:
10 M3 x 30mm screws

NEEDS:
Setup on car

COMMENTS:
Can be used any place this size screw is needed