Axial Diff Gasket 16x25x0.5mm

    This is a pair of replacement Differential Gaskets
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Fiber building, grey in color
Replaces used or damaged differential gaskets

CONSISTS OF:
Two Differential Gaskets

NEEDS:
Installation following the model handbook

SPECS:
Outdoors Diameter: 1" (25mm)
Inside Diameter: .67" (17mm)
Density: .020" (.52mm)

You will like this thing if you have the thing above mentioned.



This is the Sturdy Bevel Gear Set for usage on the
Axial AX10 Scorpion.

FEATURES:
Provides lower gear ratio and lowers torque twist
Steel building

CONSISTS OF:
One 13T Bevel Gear
One 43T Bevel Gear

NEEDS:
Installation on the automobile

The below thing additionally sets truly well with the thing being gone over.

Diff Case Small

This is the Little Differential Case for the Axial Rock Crawler.

FEATURES:
Plastic building, black in color

CONSISTS OF:
Two little differential cases

NEEDS:
Installation on the automobile

SPECS:
Diameter: .98" (25mm)
Height: .66" (17mm)

Several others have actually acquired this thing together with the thing that you are presently checking out.

O-Ring 5x1mm (10)

These are the 5x1mm O-Rings from Axial.

FEATURES:
Rubber building
Orange in color

CONSISTS OF:
Ten O-Rings

SPECS:
Outer Diameter: 6.5mm (0.25")
Inner Diameter: 5mm (0.196")
Density: 1mm (0.039")

Several others have actually acquired this thing together with the thing that you are presently checking out.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Construction
Shielded with blue rubber seals

CONSISTS OF:
Two Ball Bearings

NEEDS:
Assembly to automobile

SPECS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Density: 4mm

REMARKS:
These bearings are utilized to support the Primary Clutch (one needed).

This is a wonderful enhancement to the thing presently being gone over.

O-Ring 2.5x1.5mm (10)

These are the 2.5x1.5mm O-Rings from Axial.

FEATURES:
Rubber building
Orange in color

CONSISTS OF:
Ten O-Rings

SPECS:
Outer Diameter: 5.5mm (0.22")
Inner Diameter: 2.5mm (0.10")
Density: 1.5mm (0.06")

Here is another thing that compliments the thing being gone over.

Axle 5x35mm

This is a pair of replacement Axles
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Steel building, black in color
Replaces used or damaged axles
Works on the front or rear of the model

CONSISTS OF:
Two Axles

NEEDS:
Installation following the model handbook

SPECS:
Length: 1.37" (35mm)
Shaft Diameter: .20" (5mm) 4mm threaded

This is a wonderful enhancement to the thing presently being gone over.

Aluminum Hub Narrow 12mm Black (4)

These are the 12mm Narrow Aluminum Hex Hubs from Axial.

FEATURES:
Aluminum building, black in color
Replaces used or damaged hex centers

CONSISTS OF:
4 aluminum hex centers
4 steel drive pins
4 set screws

NEEDS:
Installation following the model handbook

SPECS:
Hex Size: .47" (12mm)

Here is a excellent thing that many others have actually purchased the very same time.



These are the Axial M3x61mm Hex Socket Button Head Screws.

FEATURES:
Steel building. black in color

CONSISTS OF:
Six M3x61mm Hex Socket Button Head Screws

NEEDS:
2mm hex wrench

SPECS:
Diameter: 3mm
Length: 61mm
Length of Threaded Area: 8mm

This thing compliments the above gone over thing.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal building

CONSISTS OF:
Ten M3 x 10mm screws

NEEDS:
Installation on automobile

REMARKS:
Can be utilized wherever this size screw is needed