Axial Body Clip 6mm Black (10)

This is a package of 10 Body Clips from Axial.

FEATURES:
Steel construction, black in color

INCLUDES:
10 6mm body clips

SPECS:
Length: .82" (21mm)

You will like this item if you have the item just above mentioned.

Landing Skid

Requirements:
Landing skid x 1
Washer x 2(Φ2.6xΦ5.8x0.6mm)
Socket button head screw x 2(M2.5x10mm)

Here is a terrific item that several others have actually bought at the exact same time.

Hexagon Screw Driver

Utilizing on heli's M2 socket screw and M3 socket screw!

Requirements:
1.5mm(Black/26.6g)x1
2.0mm(Blue/28.6g)x1
2.5mm(Purple/29.5g)x1
3.0mm(Red/31g)x1

Want another terrific item to compliment the above stated item?



This is the DuraTrax NiMH 7.2V 5000mAh Onyx Stick Battery Load
with Standard Connector.

FEATURES:
Perfect sport pack for automobiles, trucks and boats

INCLUDES:
DuraTrax NiMH 7.2V 5000mAh Onyx Stick Battery with Basic
    Connector

NEEDS:
NiMH suitable battery charger such as the Duratrax Onyx series

SPECS:
Capability: 5000mAh
Number of Cells in Series: 6
Rated Voltage: 7.2V
Minutes. Release Voltage: 5.4V
Optimum Recommended Charge Current: 5 amps
Release Lead: 14AWG 2.7" (70mm) long wire w/Standard connector
Load Dimensions: 5.3 x 1.8 x 0.94" (135 x 45 x 24mm)
Weight: 15.6 oz (442 g)
Number of Welds per Connection: 6 spot welds
Cell Size: Sub-C

The below item additionally pairs really well with the item being reviewed.



This is the 7.4V TWO 15C 250mAh LiPo Battery from Venom-Group.

FEATURES:
Created for usage with the Losi micro 1/24 scale rally automobiles, 4WD
    brief course trucks and little indoor airplane
Pre-wired with a Molex 51005 connector and XH design balance connector

INCLUDES:
7.4V TWO 15C 250mAh LiPo Battery with Molex 51005 Connector and XH
    Balance Connector

NEEDS:
LiPo battery charger with balancing ability

SPECS:
Configuration: 2S1P
Weight: 0.56 oz (16g)
Dimensions: 1.3 x 0.51 x 0.83" (33 x 13 x 21mm)
Constant Discharge: 15C (3.75A)
Max Burst Rate: 30C (7.5A)
Watt Hours: 1.85

COMMENTS:
CHECK OUT the WHOLE guidelines prior to usage
ALWAYS use a LiPo-approved battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER enable to Release below 2.5V per cell
NEVER dismantle or customize pack circuitry in any method or puncture cells
NEVER place on flammable materials or leave unattended throughout
    Charging
ALWAYS charge in a fireproof area
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of children

This item praises the above reviewed item.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Equipment for the Scorpion Rock Crawler AXIC9001.

FEATURES:
Black plastic construction

INCLUDES:
One 48DP 87T spur gear

NEEDS:
Installation on the Rock Crawler

Lots of others have actually acquired this item along with the item that you are presently checking out.

Hex Socket Button Head Black M3x6mm (10)

These are the 3x6mm Hex Socket Button Head Screws used on the
Axial Wraith Rock Racer.

FEATURES:
Steel construction, black in color

INCLUDES:
10 3x6mm Hex Socket Button Head Screws

NEEDS:
2mm hex wrench, GPMR8011

SPECS:
Length: 6mm
Diameter: 3mm