Axial Body Clip 6mm Black (10)

This is a plan of 10 Body Clips from Axial.

FEATURES:
Steel construction, black in color

CONSISTS OF:
10 6mm body clips

SPECIFICATIONS:
Length: .82" (21mm)

You will enjoy this thing if you have the thing above pointed out.

Landing Skid

Specifications:
Landing skid x 1
Washer x 2(Φ2.6xΦ5.8x0.6mm)
Socket button head screw x 2(M2.5x10mm)

Right here is a wonderful product that many others have bought at the exact same time.

Hexagon Screw Driver

Utilizing on heli's M2 socket screw and M3 socket screw!

Specifications:
1.5mm(Black/26.6g)x1
2.0mm(Blue/28.6g)x1
2.5mm(Purple/29.5g)x1
3.0mm(Red/31g)x1

Want one more wonderful product to compliment the above stated product?



This is the DuraTrax NiMH 7.2V 5000mAh Onyx Stick Battery Pack
with Requirement Connector.

FEATURES:
Perfect sport pack for vehicles, trucks and boats

CONSISTS OF:
DuraTrax NiMH 7.2V 5000mAh Onyx Stick Battery with Conventional
    Adapter

REQUIRES:
NiMH compatible charger such as the Duratrax Onyx series

SPECIFICATIONS:
Capacity: 5000mAh
Number of Cells in Series: 6
Rated Voltage: 7.2V
Min. Release Voltage: 5.4V
Maximum Recommended Charge Current: 5 amps
Release Lead: 14AWG 2.7" (70mm) long wire w/Standard port
Pack Measurements: 5.3 x 1.8 x 0.94" (135 x 45 x 24mm)
Weight: 15.6 oz (442 g)
Number of Welds per Connection: 6 spot welds
Cell Size: Sub-C

The below product additionally pairs really well with the product being gone over.



This is the 7.4V TWO 15C 250mAh LiPo Battery from Venom-Group.

FUNCTIONS:
Developed for use with the Losi micro 1/24 scale rally vehicles, 4WD
    brief course trucks and little indoor aircraft
Pre-wired with a Molex 51005 port and XH design balance port

CONSISTS OF:
7.4V TWO 15C 250mAh LiPo Battery with Molex 51005 Adapter and XH
    Balance Adapter

REQUIRES:
LiPo charger with balancing capability

SPECIFICATIONS:
Configuration: 2S1P
Weight: 0.56 oz (16g)
Measurements: 1.3 x 0.51 x 0.83" (33 x 13 x 21mm)
Continuous Discharge: 15C (3.75A)
Max Burst Rate: 30C (7.5A)
Watt Hours: 1.85

COMMENTS:
CHECK OUT the WHOLE instructions before use
ALWAYS use a LiPo-approved charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER permit to Release listed below 2.5V per cell
NEVER take apart or customize pack electrical wiring in any method or leak cells
NEVER put on flammable products or leave ignored throughout
    Charging
ALWAYS charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of kids

This product praises the above gone over product.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Equipment for the Scorpion Rock Spider AXIC9001.

FEATURES:
Black plastic construction

CONSISTS OF:
One 48DP 87T stimulate gear

REQUIRES:
Setup on the Rock Spider

Many others have bought this product together with the product that you are currently reading about.

Hex Socket Button Head Black M3x6mm (10)

These are the 3x6mm Hex Socket Button Head Screws utilized on the
Axial Wraith Rock Racer.

FEATURES:
Steel construction, black in color

CONSISTS OF:
10 3x6mm Hex Socket Button Head Screws

REQUIRES:
2mm hex wrench, GPMR8011

SPECIFICATIONS:
Length: 6mm
Size: 3mm