Axial Body Clip 6mm Black (10)

This is a package of 10 Body Clips from Axial.

FEATURES:
Steel building, black in color

CONSISTS OF:
10 6mm body clips

SPECS:
Length: .82" (21mm)

You will love this item if you have the item previously mentioned.

Landing Skid

Specifications:
Landing skid x 1
Washer x 2(Φ2.6xΦ5.8x0.6mm)
Socket button head screw x 2(M2.5x10mm)

Below is a terrific item that numerous others have actually purchased the same time.

Hexagon Screw Driver

Using on heli's M2 socket screw and M3 socket screw!

Specifications:
1.5mm(Black/26.6g)x1
2.0mm(Blue/28.6g)x1
2.5mm(Purple/29.5g)x1
3.0mm(Red/31g)x1

Want another terrific item to compliment the above discussed item?



This is the DuraTrax NiMH 7.2V 5000mAh Onyx Stick Battery Load
with Standard Connector.

FEATURES:
Suitable sport pack for vehicles, trucks and boats

CONSISTS OF:
DuraTrax NiMH 7.2V 5000mAh Onyx Stick Battery with Standard
    Connector

NEEDS:
NiMH compatible battery charger such as the Duratrax Onyx series

SPECS:
Capability: 5000mAh
Number of Cells in Series: 6
Rated Voltage: 7.2V
Minutes. Release Voltage: 5.4V
Optimum Recommended Charge Current: 5 amps
Release Lead: 14AWG 2.7" (70mm) long wire w/Standard adapter
Load Measurements: 5.3 x 1.8 x 0.94" (135 x 45 x 24mm)
Weight: 15.6 oz (442 g)
Number of Welds per Connection: 6 area welds
Cell Size: Sub-C

The below item additionally sets really well with the item being gone over.



This is the 7.4V 2S 15C 250mAh LiPo Battery from Venom-Group.

FUNCTIONS:
Created for usage with the Losi micro 1/24 scale rally vehicles, 4WD
    short course trucks and small indoor aircraft
Pre-wired with a Molex 51005 adapter and XH style balance adapter

CONSISTS OF:
7.4V 2S 15C 250mAh LiPo Battery with Molex 51005 Connector and XH
    Balance Connector

NEEDS:
LiPo battery charger with balancing capability

SPECS:
Configuration: 2S1P
Weight: 0.56 oz (16g)
Measurements: 1.3 x 0.51 x 0.83" (33 x 13 x 21mm)
Constant Discharge: 15C (3.75A)
Max Burst Rate: 30C (7.5A)
Watt Hours: 1.85

REMARKS:
READ the WHOLE instructions before usage
ALWAYS utilize a LiPo-approved battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER enable to Release listed below 2.5V per cell
NEVER dismantle or customize pack circuitry in any way or leak cells
NEVER put on combustible materials or leave ignored during
    Charging
ALWAYS charge in a fire-resistant area
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY shut out of reach of kids

This item compliments the above gone over item.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Equipment for the Scorpion Rock Spider AXIC9001.

FEATURES:
Black plastic building

CONSISTS OF:
One 48DP 87T stimulate gear

NEEDS:
Setup on the Rock Spider

Several others have actually acquired this item together with the item that you are presently reviewing.

Hex Socket Button Head Black M3x6mm (10)

These are the 3x6mm Hex Socket Button Head Screws used on the
Axial Wraith Rock Racer.

FEATURES:
Steel building, black in color

CONSISTS OF:
10 3x6mm Hex Socket Button Head Screws

NEEDS:
2mm hex wrench, GPMR8011

SPECS:
Length: 6mm
Diameter: 3mm