Axial Bearing 5x11x4mm

This is a pair of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building, silver in color
Sealed design helps keep the bearing running smooth and friction free

CONSISTS OF:
2 Bearings

NEEDS:
Setup following the design handbook

SPECS:
Inside Size: 5mm
Outdoors Size: 11mm
Density: 4mm

Want another wonderful product to match the above discussed product?

Bearing 10x15x4mm

This is a pair of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building, silver in color
Protected to assist keep the bearing running smooth and friction free

CONSISTS OF:
2 Bearings

NEEDS:
Setup following the design handbook

SPECS:
Inside Size: 10mm
Outdoors Size: 15mm
Density: 4mm

This product is frequently bought with the above discussed product.

Bearing 15x21x4mm (2)

This is a pair of 10x15x4mm Bearings from Axial.

FEATURES:
Stainless steel building, silver in color
Protected to assist keep the bearing running smooth and friction free

CONSISTS OF:
2 Bearings

NEEDS:
Setup following the design handbook

SPECS:
Inside Size: 15mm
Outdoors Size: 21mm
Density: 4mm

Get this product to improve the one you read around.



These are the CNC Machined Accuracy Aluminum Steering Knuckles
For the Axial Wraith

FEATURES:
Our CNC Machined Aluminum Front Steering knuckles considerably improves
the toughness on your Axial Wraith, and improves the steering
reaction by taking out any flex of the stock plastic unit. The
C-Hubs likewise adds more toughness and eliminate any undesirable flex for
the Axial Wraith and it has the same dimensions and adjustability as
the stock plastic unit.

These knuckles are anodized black in color.

INCLUDES:
2 guiding knuckles
4 M39x9mm cap head screws with hex sockets

SPECS:
Length: 1-3/4" (44mm)
Width: 7/16" (36mm)
Height: 1-1/4" (32mm)

COMMENTS:
These knuckles can be set up on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Package (AXID9020)

Below is another product that praises the product being gone over.



This is the 38T Strong Bevel Gear Set for the Scorpion.

FEATURES:
Metal building, black in color

CONSISTS OF:
One pinion gear
One 38T gear

NEEDS:
Setup

Want another wonderful product to match the above discussed product?

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pushed fiber building
Replaces used slipper pads

CONSISTS OF:
Slipper Pad for the Axial Scorpion

NEEDS:
Setting up in slipper clutch assembly following guidelines in
    handbook

Several others have actually bought this product in addition to the product that you are presently checking out.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Spider AXIC9001.

FEATURES:
Black plastic building

CONSISTS OF:
One 48DP 87T stimulate gear

NEEDS:
Setup on the Rock Spider

The below product also sets really well with the product being gone over.

Flange Pipe 3x4.5x5.5 (4)

These are the 3x4.5x5.5 Flange Water lines
for the Axial Scorpion Rock Crawler.

FEATURES:
Metal building, black in color

CONSISTS OF:
4 3x4.5x5.5 flange pipelines

NEEDS:
Setup on the Rock Spider

SPECS:
Length: .21" (5.5mm)
Size: .17" (4.5mm) at tiniest point
Size: .27" (7mm) at largest point