Axial Bearing 5x11x4mm

This is a pair of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel construction, silver in color
Sealed design assists keep the bearing running smooth and friction totally free

CONSISTS OF:
Two Bearings

REQUIRES:
Installation following the model manual

SPECS:
Inside Size: 5mm
Outside Size: 11mm
Density: 4mm

Want another excellent item to match the above mentioned item?

Bearing 10x15x4mm

This is a pair of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel construction, silver in color
Shielded to help keep the bearing running smooth and friction totally free

CONSISTS OF:
Two Bearings

REQUIRES:
Installation following the model manual

SPECS:
Inside Size: 10mm
Outside Size: 15mm
Density: 4mm

This item is regularly purchased with the above mentioned item.

Bearing 15x21x4mm (2)

This is a pair of 10x15x4mm Bearings from Axial.

FEATURES:
Stainless-steel construction, silver in color
Shielded to help keep the bearing running smooth and friction totally free

CONSISTS OF:
Two Bearings

REQUIRES:
Installation following the model manual

SPECS:
Inside Size: 15mm
Outside Size: 21mm
Density: 4mm

Get this item to boost the one you are reading about.



These are the CNC Machined Precision Aluminum Steering Knuckles
For the Axial Wraith

FUNCTIONS:
Our CNC Machined Aluminum Front Steering knuckles significantly improves
the toughness on your Axial Wraith, and improves the steering
response by securing any flex of the stock plastic system. The
C-Hubs likewise includes more toughness and take away any undesirable flex for
the Axial Wraith and it has the exact same dimensions and adjustability as
the stock plastic unit.

These knuckles are anodized black in color.

INCLUDES:
Two guiding knuckles
Four M39x9mm cap head screws with hex sockets

SPECS:
Length: 1-3/4" (44mm)
Width: 7/16" (36mm)
Height: 1-1/4" (32mm)

REMARKS:
These knuckles can be installed on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Set (AXID9020)

Here is another item that praises the item being talked about.



This is the 38T Sturdy Bevel Gear Set for the Scorpion.

FEATURES:
Metal construction, black in color

CONSISTS OF:
One pinion gear
One 38T gear

REQUIRES:
Installation

Want another excellent item to match the above mentioned item?

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pressed fiber construction
Changes worn slipper pads

CONSISTS OF:
Slipper Pad for the Axial Scorpion

REQUIRES:
Setting up in slipper clutch assembly following instructions in
    manual

Several others have actually purchased this item along with the item that you are currently reviewing.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Spider AXIC9001.

FEATURES:
Black plastic construction

CONSISTS OF:
One 48DP 87T stimulate gear

REQUIRES:
Installation on the Rock Spider

The listed below item also sets truly well with the item being talked about.

Flange Pipe 3x4.5x5.5 (4)

These are the 3x4.5x5.5 Flange Pipes
for the Axial Scorpion Rock Crawler.

FEATURES:
Metal construction, black in color

CONSISTS OF:
Four 3x4.5x5.5 flange pipelines

REQUIRES:
Installation on the Rock Spider

SPECS:
Length: .21" (5.5mm)
Size: .17" (4.5mm) at tiniest point
Size: .27" (7mm) at biggest point