Axial Bearing 10x15x4mm

This is a pair of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel construction, silver in color
Protected to assist keep the bearing running smooth and friction totally free

CONSISTS OF:
2 Bearings

REQUIRES:
Installation following the design manual

SPECS:
Inside Diameter: 10mm
Outdoors Diameter: 15mm
Thickness: 4mm

This thing compliments the above talked about thing.

Bearing 5x11x4mm

This is a pair of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel construction, silver in color
Sealed design assists keep the bearing running smooth and friction totally free

CONSISTS OF:
2 Bearings

REQUIRES:
Installation following the design manual

SPECS:
Inside Diameter: 5mm
Outdoors Diameter: 11mm
Thickness: 4mm

Want an additional fantastic thing to compliment the above stated thing?

Bearing 5x10x4mm

This is a pair of replacement 5x10x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel construction, silver in color
Sealed design assists keep the bearing running smooth and friction totally free

CONSISTS OF:
2 Bearings

REQUIRES:
Installation following the design manual

SPECS:
Inside Diameter: 5mm
Outdoors Diameter: 10mm
Thickness: 4mm

Often gotten with the thing that you are currently reading about.

Bearing 8x16x5mm

This is a pair of replacement 8x16x5mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel construction, silver in color
Sealed design assists keep the bearing running smooth and friction totally free

CONSISTS OF:
2 Bearings

REQUIRES:
Installation following the design manual

SPECS:
Inside Diameter: 8mm
Outdoors Diameter: 16mm
Thickness: 5mm

Here is an additional thing that compliments the thing being talked about.



These are the CNC Machined Precision Aluminum Steering Knuckles
For the Axial Wraith

FEATURES:
Our CNC Machined Aluminum Front Steering knuckles considerably improves
the toughness on your Axial Wraith, and improves the steering
reaction by securing any flex of the stock plastic system. The
C-Hubs also includes more toughness and take away any undesirable flex for
the Axial Wraith and it has the same measurements and adjustability as
the stock plastic unit.

These knuckles are anodized black in color.

INCLUDES:
2 steering knuckles
Four M39x9mm cap head screws with hex sockets

SPECS:
Length: 1-3/4" (44mm)
Width: 7/16" (36mm)
Height: 1-1/4" (32mm)

REMARKS:
These knuckles can be installed on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Set (AXID9020)

Here is a fantastic thing that several others have actually bought at the same time.

Lectron Pro 7.4V 5200mAh 50C Lipo Deans

5200mAh 50C for under $50!
This 2-cell 5200mAh 50C lipo is perfect for 1/10 scale vehicles, trucks, and buggies! Features a big capacity for prolonged run times and a massive C score so you'll have all the power you'll ever need. Includes a Deans-type connector on the discharge leads.
Features

High-end performance and dependability at a budget friendly rate
Perfect for 1/10 scale vehicles, trucks, and buggies
Features a big capacity for prolonged run times and a massive C score so you'll have all the power you'll ever need
Includes a Deans-type connector on the discharge leads

Requirements

Length: 138 mm
Width: 47 mm
Height: 25 mm
Weight: 266 g