Axial Aluminum Servo Horn 25T

This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.

FEATURES:
Difficult anodized aluminum building
Compression install, two screws install on either side of arm and
    tighten center hole around servo spline

INCLUDES:
Axial 25T Aluminum Servo Horn
Two 2x8mm socket head screws

SPECIFICATIONS:
Length: 0.98" (25mm) from center of servo installing hole to end of arm
Hole Size: 3mm
Pitch:3x30

Numerous others have actually gotten this item in addition to the item that you are presently reviewing.

Waterproof Standard Digital Servo 0.15Sec / 208Oz @ 6V

The SW0231MG is a budget friendly water resistant digital servo with excellent torque for lots of applications. This brushed servo functions a speed of .17 and 208.0 oz-in of torque 6.0V. It combines leading edge innovation with very high 12-bit (4096) resolution and metal gears for your greater accuracy when evading puddles. This is a terrific upgrade if your seeking to drive your RC automobile in any condition...rain, sleet, or snow.

Features:

• Integrates cutting edge
  innovation with very high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Extremely strong metal gears guarantee long-life and durability.
• Our servos are completely green ? from materials to production, these servos are environmentally friendly.
• Ideal for RC cars, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Equipment: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Rating: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

Right here is a wonderful item that many others have actually purchased the exact same time.



Racers Edge 25C 5000 mAh 2S1P LI-Poly Battery hardwired with Deans Ultra Plug. Racers Edge battery is lighter than conventional Ni-Cd or Ni-Mh batteries while offering improved performance and run times. It uses the exact same balancing connection as Align or Electrifly chargers. Make certain to utilize a voltage cut off if your speed control does not come geared up with one. ONLY USE A BATTERY CHARGER PARTICULARLY FOR Li-Poly cells!!!

The below item additionally sets truly well with the item being gone over.

Steering Upgrade Kit

This is the Steering Upgrade Kit by Axial
for usage on Axial AX10 and SCX10.

FEATURES:
Replaces the stock plastic steering links
This package will increase steering strength and accuracy

INCLUDES:
Plastic linkage set
Two aluminum linkage rods
Installing hardware
In-depth directions

NEEDS:
Installation on model

This item praises the main item here.



This is a low-resistance, compact-size 2-Pin Ultra Plug Connector from Deans.
This design removes the possiblility of reverse polarity connections.
Provides a protected connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

NEEDS:
Soldering connectors onto wires

You will love this product if you have the product above pointed out.

Rock Crawler Brushed Motor 35T HD

This is the Tekin T35 HD 35 Turn Rock Crawler Brushed Motor.

FEATURES:
High-strength updated ferrite magnets
Legal for rock crawling competitors
Completely rebuildable
Double accuracy ball bearings
120 day limited guarantee

INCLUDES:
Tekin T35 HD 35 Turn Rock Crawler Brushed Motor

NEEDS:
ESC such as the Tekin FXR Brushed ESC, TEKM1091
Motor leads
Pinion gear depending on automobile

SPECIFICATIONS:
Input Voltage: THREE LiPo or 10-cell NiMH battery
Dimensions: 2.07 x 1.42" (52.7 x 36mm)
Shaft Size: 0.125" (3.2mm)
Bearing Size: 3/8 x 1/8"
Motor Weight: 5.98oz (169g)