Axial Aluminum Servo Horn 25T

This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.

FEATURES:
Tough anodized aluminum building and construction
Compression install, 2 screws install on either side of arm and
    tighten center hole around servo spline

CONSISTS OF:
Axial 25T Aluminum Servo Horn
2 2x8mm socket head screws

SPECIFICATIONS:
Length: 0.98" (25mm) from center of servo mounting hole to end of arm
Hole Size: 3mm
Pitch:3x30

Many others have actually purchased this product in addition to the product that you are currently checking out.

Waterproof Standard Digital Servo 0.15Sec / 208Oz @ 6V

The SW0231MG is a budget friendly waterproof digital servo with great torque for numerous applications. This brushed servo functions a speed of .17 and 208.0 oz-in of torque 6.0V. It combines leading edge technology with super high 12-bit (4096) resolution and metal gears for your greater precision when dodging puddles. This is a terrific upgrade if your aiming to drive your RC vehicle in any condition...rain, sleet, or snow.

Functions:

• Integrates cutting edge
  technology with super high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Incredibly strong metal gears make sure long-life and durability.
• Our servos are absolutely green ? from products to production, these servos are ecologically friendly.
• Ideal for RC cars, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Equipment: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Rating: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

Below is a great product that numerous others have actually bought at the very same time.



Racers Edge 25C 5000 mAh 2S1P LI-Poly Battery hardwired with Deans Ultra Plug. Racers Edge battery is lighter than traditional Ni-Cd or Ni-Mh batteries while offering improved efficiency and run times. It utilizes the very same balancing connection as Align or Electrifly chargers. Be sure to utilize a voltage cut off if your speed control does not come equipped with one. ONLY USE A BATTERY CHARGER PARTICULARLY FOR Li-Poly cells!!!

The listed below product likewise pairs truly well with the product being talked about.

Steering Upgrade Kit

This is the Steering Upgrade Set by Axial
for usage on Axial AX10 and SCX10.

FEATURES:
Replaces the stock plastic guiding links
This kit will increase guiding strength and precision

CONSISTS OF:
Plastic linkage set
2 aluminum linkage rods
Mounting hardware
In-depth directions

NEEDS:
Setup on model

This product praises the main item right here.



This is a low-resistance, compact-size 2-Pin Ultra Plug Connector from Deans.
This design removes the possiblility of reverse polarity connections.
Provides a safe connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

NEEDS:
Soldering connectors onto wires

You will love this item if you have the item previously discussed.

Rock Crawler Brushed Motor 35T HD

This is the Tekin T35 HD 35 Turn Rock Spider Brushed Motor.

FEATURES:
High-strength upgraded ferrite magnets
Legal for rock crawling competitions
Entirely rebuildable
Double precision ball bearings
120 day minimal guarantee

CONSISTS OF:
Tekin T35 HD 35 Turn Rock Spider Brushed Motor

NEEDS:
ESC such as the Tekin FXR Brushed ESC, TEKM1091
Motor leads
Pinion equipment depending on vehicle

SPECIFICATIONS:
Input Voltage: THREE LiPo or 10-cell NiMH battery
Measurements: 2.07 x 1.42" (52.7 x 36mm)
Shaft Size: 0.125" (3.2mm)
Bearing Size: 3/8 x 1/8"
Motor Weight: 5.98oz (169g)