Axial Aluminum Servo Horn 25T

This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.

FEATURES:
Difficult anodized aluminum building
Compression mount, two screws set up on either side of arm and
    tighten center hole around servo spline

CONSISTS OF:
Axial 25T Aluminum Servo Horn
Two 2x8mm socket head screws

SPECIFICATIONS:
Length: 0.98" (25mm) from center of servo mounting hole to end of arm
Hole Diameter: 3mm
Pitch:3x30

Several others have actually acquired this thing along with the thing that you are currently checking out.

Waterproof Standard Digital Servo 0.15Sec / 208Oz @ 6V

The SW0231MG is a spending plan friendly water resistant digital servo with terrific torque for lots of applications. This brushed servo functions a speed of .17 and 208.0 oz-in of torque 6.0V. It combines leading edge technology with super high 12-bit (4096) resolution and metal gears for your greater accuracy when evading puddles. This is a terrific upgrade if your planning to drive your RC car in any condition...rain, sleet, or snow.

Functions:

• Integrates leading edge
  technology with super high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Extremely strong metal gears make sure long-life and durability.
• Our servos are absolutely green ? from materials to production, these servos are environmentally friendly.
• Ideal for RC vehicles, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Gear: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Score: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

Right here is a wonderful thing that several others have actually purchased the exact same time.



Racers Edge 25C 5000 mAh 2S1P LI-Poly Battery hardwired with Deans Ultra Plug. Racers Edge battery is lighter than standard Ni-Cd or Ni-Mh batteries while offering enhanced efficiency and run times. It utilizes the same balancing connection as Align or Electrifly battery chargers. Make certain to use a voltage cut off if your speed control doesn't come equipped with one. ONLY USAGE A CHARGER PARTICULARLY FOR Li-Poly cells!!!

The listed below thing likewise sets really well with the thing being gone over.

Steering Upgrade Kit

This is the Steering Upgrade Package by Axial
for usage on Axial AX10 and SCX10.

FEATURES:
Replaces the stock plastic guiding links
This kit will increase guiding strength and accuracy

CONSISTS OF:
Plastic linkage set
Two aluminum linkage rods
Installing hardware
In-depth instructions

REQUIRES:
Installation on design

This thing praises the main item here.



This is a low-resistance, compact-size 2-Pin Ultra Plug Port from Deans.
This design eliminates the possiblility of reverse polarity connections.
Provides a protected connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

REQUIRES:
Soldering ports onto wires

You will love this item if you have the item earlier stated.

Rock Crawler Brushed Motor 35T HD

This is the Tekin T35 HD 35 Turn Rock Crawler Brushed Motor.

FEATURES:
High-strength updated ferrite magnets
Legal for rock crawling competitors
Totally rebuildable
Double accuracy ball bearings
120 day minimal service warranty

CONSISTS OF:
Tekin T35 HD 35 Turn Rock Crawler Brushed Motor

REQUIRES:
ESC such as the Tekin FXR Brushed ESC, TEKM1091
Motor leads
Pinion equipment depending upon car

SPECIFICATIONS:
Input Voltage: 3S LiPo or 10-cell NiMH battery
Dimensions: 2.07 x 1.42" (52.7 x 36mm)
Shaft Diameter: 0.125" (3.2mm)
Bearing Size: 3/8 x 1/8"
Motor Weight: 5.98oz (169g)